solid mechanics

posted by .

describe in brief MOHR's circle for biaxial stresses.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Mechanics

    How do you dereive equilibrium equations for a 2-D pi/3 section of a circle in polar coords?
  2. Solid Mechanics

    A casts iron block of 5cm2 cross section carries load of 50KN. Calculate the magnitude or normal and shear stresses on a plane whose normal is inclined at 30o to the axis of the block. Also determine the maximum shear stress in the …
  3. solid mechanics

    A piece of material subjected to three mutually perpendicular stresses of 70, 56 and 84 Mpa. If E = 200GPa, Poisson's ratio = 0.28, determine (10) (a) Principal strains (b) Shear modules (c) Bulk modules.
  4. solid mechanics

    a steel bar 10m long and 10cm*10cm in section .it is subjected to an axial pull of 250KN .determine the intensities of normal and tangential stresses on a plane section at 60 degree to the longitudinal axis .
  5. SOLID MECHANICS

    A piece of material subjected to three mutually perpendicular stresses of 70, 56 and 84 MPa. If E= 200 Gpa, Poissions ratio= 0.28 Determine 1) Principal strains 2) Shear modulus 3) Bulk modulus
  6. solid mechanics

    at a point in a strained material the principal stresses are 60MPa and 40MPa.find the position of the plane across which the resultant stress is most inclined to the normal and determine the value of this stress.
  7. solid mechanics

    Q.1 The normal stresses at a certain point in a body are 80MPa tension and 50Mpa compression. There are also shear stresses across the plane of tension and compression equal to 30MPa.Calculate the maximum direct stress and maximum …
  8. solid mechanics

    At a point in a strained material the principal stresses are 60MPa and 40Mpa. Find the position of the plane across which the resultant stress is most inclined to the normal and determine the value of this stress. (Ans:50degree45' …
  9. Materials Science

    In this problem, you will construct the 2D Mohr's circle for two plane stress states defined in terms of the Cartesian components of the stress tensor in the x,y reference frame: [ σx,σy,τxy]. For each of these stress …
  10. solid mechanics

    A steel plate is subjected to tensile stresses of 200MPa and 150 MPa at right angles to each other. Determine the normal and tangential stresses on a plane inclined at 60 to the 200 MPa stress. Also find the plane on which the resultant …

More Similar Questions