physics
posted by brad .
An inductor (L = 405 mH), a capacitor (C = 4.43 µF), and a resistor (R = 400 ) are connected in series. A 50.0 Hz AC generator produces a peak current of 250 mA in the circuit.
(a) Calculate the required peak voltage ΔVmax.
V
(b) Determine the phase angle by which the current the applied voltage.
°

See previous post: Fri,112913,8:15 PM.
Respond to this Question
Similar Questions

Physics
In a series circuit, a generator (1400 Hz, 12.0 V) is connected to a 15.0 resistor, a 3.80μF capacitor, and a 5.70mH inductor. Find the voltages across (a) the resistor, (b) the capacitor, and (c) the inductor. 
Physics
In a series circuit, a generator (1400 Hz, 12.0 V) is connected to a 15.0 resistor, a 3.80ìF capacitor, and a 5.70mH inductor. Find the voltages across (a) the resistor, (b) the capacitor, and (c) the inductor. 
physics
In a series circuit, a generator (1254 Hz, 13.8 V) is connected to a 15.5Ω resistor, a 4.25µF capacitor, and a 5.32mH inductor. Find the voltage across each circuit element. VR = VC = VL = 
physics please help!!
1. A 26.0Ω resistor, a 12.0µF capacitor, and a 17.0mH inductor are connected in series with a 150V generator. (a) At what frequency is the current a maximum? 
Physics
When a resistor is connected across the terminals of an ac generator (112 V) that has a fixed frequency, there is a current of 0.500 A in the resistor. When an inductor is connected across the terminals of this same generator, there … 
Physics
When a resistor is connected across the terminals of an ac generator (112 V) that has a fixed frequency, there is a current of 0.500 A in the resistor. When an inductor is connected across the terminals of this same generator, there … 
physics
An inductor (L = 405 mH), a capacitor (C = 4.43 µF), and a resistor (R = 400 ) are connected in series. A 50.0 Hz AC generator produces a peak current of 250 mA in the circuit. (a) Calculate the required peak voltage ΔVmax. V … 
PHYSICS
An inductor (L = 405 mH), a capacitor (C = 4.43 µF), and a resistor (R = 400 ) are connected in series. A 50.0 Hz AC generator produces a peak current of 250 mA in the circuit. (a) Calculate the required peak voltage ΔVmax. V … 
physics
Two 250µF capacitors, with equal capacitances, and a 1.5mH inductor are connected as shown in the figure. It is desired to "drive" the circuit by placing an ac generator in series with the inductor. Which output voltage for the … 
physics
An inductor (L=440mH), a capacitor (C=6.00μF), and a resistor (R=440Ω) are connected in series. A 75.0Hz ac generator produces a peak current of 255mA in the circuit. a) What is the impedance of the circuit?