Physics

posted by .

A liquid of density 1.23 × 103 kg/m3 flows steadily through a pipe of varying diameter and height. At location 1 along the pipe the flow speed is 9.23 m/s and the pipe diameter is 1.07 × 101 cm. At location 2 the pipe diameter is 1.71 × 101 cm. At location 1 the pipe is 9.37 m higher than it is at location 2. Ignoring viscosity, calculate the difference between the fluid pressure at location 2 and the fluid pressure at location 1.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    The water flowing through a 1.9 cm (inside diameter) pipe flows out through three 1.3 cm pipes. (a) If the flow rates in the three smaller pipes are 24, 18, and 13 L/min, what is the flow rate in the 1.9 cm pipe?
  2. Physics

    Water flows under pressure from one pipe into a second pipe having half the diameter. The volume flow rate in the narrow pipe is ________ that in the wide pipe, and the speed of the water in the narrow pipe is _______ that in the wide …
  3. Fluid Mechanics

    Water flows into a cylindrical tank through pipe 1 at a rate of 25 ft/s and leaves through pipe 2 at 10 ft/s and through pipe 3 at 12 ft/s. Pipe 4 is an open air vent. Internal diameters of the pipes are: D1=3 in, D2= 2 in, D3=2.5 …
  4. physics

    A round pipe of varying diameter carries petroleum from a wellhead to a refinery. At the wellhead the pipe's diameter is 56.3 cm (0.563 m) and the flow speed of the petroleum is 13.5 m/s. At the refinery the petroleum flows at 5.65 …
  5. Physics

    The Equation of Continuity states that the mass flow rate has the same value at every position along a tube that has a single entry and a single exit point for fluid flow. Basically it boils down to the idea that the fluid doesn’t …
  6. physics

    A horizontal pipe (Venturi Tube) 10.0 cm in diameter has a smooth reduction to a pipe 5.00 cm in diameter. If the pressure of the water in the larger pipe is 2.0 x 105 Pa and the pressure in the smaller pipe is 5.0 x 104 Pa, at what …
  7. physics

    A horizontal pipe (Venturi Tube) 10.0 cm in diameter has a smooth reduction to a pipe 5.00 cm in diameter. If the pressure of the water in the larger pipe is 8.0 x 105 Pa and the pressure in the smaller pipe is 3.0 x 104 Pa, at what …
  8. physics

    The pressure in a section of horizontal pipe with a diameter of 2 cm is 143 kPa. Water flows through the pipe at 2.80 L/ s. If the pressure at a certain point is to be reduced to 103 kPa by constricting a section of the pipe, what …
  9. Physics

    Water flows into one end of a horizontal, cylindrical pipe at 2.0 m/s. The pipe then narrows until its diameter at the opposite end is only 1/3 of that at the beginning. (a) What is the flow speed at the narrow end of the pipe?
  10. Physics

    Please someone help..A horizontal pipe 10.0cm in diameter has a smooth reduction to a pipe 5.0cm in diameter. If the pressure of the water in the large pipe is 80000Pa and the pressure in the small pipe is 60000Pa at what rate does …

More Similar Questions