Physics
posted by Liz .
A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 165.0 mm from the central spin axis, and if the machine hits 53500 rev/min, what would be the centripetal force exerted on a giant amoeba of mass 8.00E9 kg at the bottom of the tube?
Respond to this Question
Similar Questions

math
The head of an industrial machine moves in a straight line horizontally backwards and forwards from a central position. The movement can be modelled using the sine wave d = 80 sin ( pie t), where d is the horizontal distance (in cm) … 
physics
In a machine, an ideal fluid with a density of 0.9*10^3 kg/m^3 and a pressure of 1.3*10^5 Pa flows at a velocity of 6.0 m/s through a level tube with a readius of 0.5 cm. This tube connects to a level tube that has a radius of 1.5 … 
physics
You are designing a centrifuge to spin at a rate of 13,880 rev/min. (a) Calculate the maximum centripetal acceleration that a testtube sample held in the centrifuge arm 14.6 cm from the rotation axis must withstand. (b) It takes 1 … 
physics
Find the linear speed of the bottom of a test tube in a centrifuge if the centripetal acceleration there is 5.5×104 times the acceleration of gravity. The distance from the axis of rotation to the bottom of the test tube is 8.0 . 
physics
Find the linear speed of the bottom of a test tube in a centrifuge if the centripetal acceleration there is 5.4×104 times the acceleration of gravity. The distance from the axis of rotation to the bottom of the test tube is 7.9cm. 
Physics
Find the linear speed of the bottom of a test tube in a centrifuge if the centripetal acceleration there is 5.1×104 times the acceleration of gravity. The distance from the axis of rotation to the bottom of the test tube is 7.7 . 
Physics
A test tube standing vertically in a test tube rack contains 2.4 cm of oil, whose density is 0.81 g/cm^3 and 6 cm of water. What is the gauge pressure on the bottom of the tube? 
Physics
A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 145.0 mm from the central spin axis, and if the machine hits 46500 rev/min, what would be the centripetal … 
Physics
A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 180.0 mm from the central spin axis, and if the machine hits 54000 rev/min, what would be the centripetal … 
Physics
A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 160.0 mm from the central spin axis, and if the machine hits 40500 rev/min, what would be the centripetal …