# Physics

posted by .

A hammer is accelerated at 13 rad/s^2 at a radiius of rotation of 1.5 m. the tangential hammer speed is 20 m/s.

a)Determine the angular velocity of the hammer
b)the magnitude of the radial component of its linear acceleration

c)the magnitude of the tangential component of its linear acceleration

• Physics -

a. C = pi*2r = 3.14 * 3 = 9.42 m.

V = (20/9.42) * 2pi = 4.25pi rad/s =

## Similar Questions

1. ### math

A hammer thrower releases the hammer after reaching an angular velocity of 14.9 rad/s. If the hammer is 1.6m from the shoulder joint, what is the linear velocity at release?
2. ### Physics

suppose the hammer has a mass of 7.26kg, the wire is 1.00m long, and the force keeping the hammer moving in a circle is 7.43 x 10^3N. what will the hammer's speed be when the thrower releases the wire?
3. ### Biomechanics

A hammer thrower is trying a new throw by adjusting the arm length to increase angular velocity technique1 angular velocity of15.4rad/ s with the hammer being 139.8 cm from the shoulder joint in technique2 they rotate with an angular …
4. ### Physics

A hammer thrower accelerates the hammer (mass = 7.30 kg) from rest within four full turns (revolutions) and releases it at a speed of 21.0 m/s. Assuming a uniform rate of increase in angular velocity and a radius of 0.80 m, calculate …
5. ### URGENT PHYSICS

A hammer thrower accelerates the hammer (mass = 7.30 kg) from rest within four full turns (revolutions) and releases it at a speed of 21.0 m/s. Assuming a uniform rate of increase in angular velocity and a radius of 0.80 m, calculate …
6. ### calculus

When a hammer thrower spins, the hammer generates a circle with a radius of 5 feet. When thrown, the hammer hits a screen that is 50 feet from the center of the throwing area. Let coordinate axes be introduced. If the hammer is released …
7. ### physics

When a hammer strikes a nail, it is compressed along its length. Suppose that a steel nail 10.00 cm long and 3.00 mm in diameter is compressed an average of 65.0 µm by a 0.460 kg hammer during a 1.20 ms collision. (a) What average …
8. ### Physics

Bob starts spinning his hammer at a rate of 2.00 rad/s^2. At the same time, he starts running towards Jim at 4.00 m/s^2. The distance from the end of the hammer to Bob's elbow is 1.20 m. If Bob takes 3 seconds before he launches the …
9. ### College Physics

1. A construction worker tosses a hammer straight up to a co-worker who is working on a platform above him. The hammer leaves his hand at 7.26 m/sec, and travels 3.33 meters upward, at which point it is caught by the worker on the …

More Similar Questions