Solar Energy Help ASAP

posted by .

Below you see a plot of an ideal and a non-ideal JV curve. Based on this plot and assuming an irradiance of 1000W/m2, give approximately the numerical values to the questions bellow:



I. Estimate the ideal Fill Factor (in %):


II. Estimate the non-ideal Fill Factor (in %):


III. Estimate the ideal efficiency (in %):


IV. Estimate the non-ideal efficiency (in %):


V. Which of the following statements is TRUE?

The inverse of the slope of the non-ideal curve at V=Vocis approximately equal to the shunt resistance.

An increase in shunt resistance will result in an decrease in fill factor in reference to the non-ideal case.

A large current in the shunt branch will increase the efficiency of the solar cell

The inverse of the slope of the non-ideal curve at V=Vocis approximately equal to the series resistance.

  • Solar Energy Help ASAP -

    81.63
    65.306
    15
    12

    The inverse of the slope of the non-ideal curve at V=Vocis approximately equal to the series resistance.

  • Solar Energy Help ASAP -

    1=81.63
    2-=65.31
    3=15
    4=12

  • Solar Energy Help ASAP -

    1)81.63
    2)65.31
    3)15
    4)12

  • Solar Energy Help ASAP -

    The inverse of the slope of the non-ideal curve at V=Vocis approximately equal to the series resistance.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. What's a Nine-Point Plot Structure?

    I'm doing a summer reading assignment on 'A Midsummer Night's Dream', and one of the questions says to use a nine point plot structure to outline the action in this play. My question is: WHAT THE HECK IS A NINE-POINT PLOT STRUCTURE?
  2. Physics

    Which of the following desceriptions about ideal gas is/are correct?
  3. ET3034TUx Solar Energy

    The current density of an ideal p-n junction under illumination can be described by: J(V)=Jph−J0(eqVkT−1) where Jph is the photo-current density, J0 the saturation-current density, q the elementary charge, V the voltage, …
  4. Solar Energy Help ASAP

    The current density of an ideal p-n junction under illumination can be described by: J(V)=Jph−J0(eqVkT−1) where Jph is the photo-current density, J0 the saturation-current density, q the elementary charge, V the voltage, …
  5. Solar Energy

    Consider a crystalline PV module with the following output parameters mentioned at STC (Standard Testing Condition) conditions by the manufacturer. Pmax = 250W Voc = 50V Isc = 6A NOCT = 40°C Temperature coefficient of power = -1W/°C …
  6. Delft Solar Cell

    Consider a crystalline PV module with the following output parameters mentioned at STC (Standard Testing Condition) conditions by the manufacturer. Pmax = 250W Voc = 50V Isc = 6A NOCT = 40°C Temperature coefficient of power = -1W/°C …
  7. ET3034TUx Solar Energy

    Consider a crystalline PV module with the following output parameters mentioned at STC (Standard Testing Condition) conditions by the manufacturer. Pmax = 250W Voc = 50V Isc = 6A NOCT = 40°C Temperature coefficient of power = -1W/°C …
  8. Math

    Assuming that the distribution is normal for weight relative to the ideal and 99% of the male participants scored between (–53.68, 64.64), where did 95% of the values for weight relative to the ideal lie?
  9. statistics

    Assuming that the distribution is normal for weight relative to the ideal and 99% of the male participants scored between (–53.68, 64.64), where did 95% of the values for weight relative to the ideal lie?
  10. Literature

    I don't understand what complication means in terms of plot structure. I mean..how does an event complicates a conflict?

More Similar Questions