physics

posted by .

10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A sign is supported by a cable and a horizontal beam.The beam has a length 1.4 m and a uniform mass of12 kg.a) If the cable is attached to the beam at a distance of 1.0 m from the hinge, what is the tension in the cable?
  2. physics

    a 10m uniform beam of weight 100 N is supported by two ropes at the ends. if a 400 N person sits at 2m from the left end of the beam, what is the tension in the left rope?
  3. Science

    If a beam of blue light was shone through a glass prism, you would expect to see A. The beam pass straight through, unaltered B. The beam bent and split into a spectrum of colors C. The beam bent, but continue as a blue beam Or D. …
  4. physics

    A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The cable …
  5. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  6. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  7. physics

    ) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  8. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  9. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  10. Physics

    Beam supported by a rope that can rotate about a hinge. The beam is supported by a rope attached 1.00 meter from the end of the beam. The beam has a mass of 10.0 kg and is 6.00 meters long. The rope makes a 60degree angle. What is …

More Similar Questions