# math help

posted by .

A gear with 20 teeth revolving at 200 revolutions per minute is meshed with a second gear turning at 250 revolutions per minute. How many teeth does this gear have ?

• math help -

since the total number of teeth/min must match,

20*200 = n*250

• math help -

16

## Similar Questions

1. ### drive-ing problem

hi this is my problem... A shaft turning at the 1800 r/min is coupled to a gear with 80 teeth, matching a gear with 62 teeth. In turn this gear is fitted to an intermediate shaft driving a gear with 40 teeth. This gear in turn drives …
2. ### science

A gear with 30 teeth turns a gear with 5 teeth. How many turns will the driven gear turn for every turn the drive gear makes?
3. ### physics

If gear A has 30 teeth and is spinning at 800rpm, gear B has 50 teeth and gear C has 20 teeth and gear D is spinning at 300rpm. How many teeth does gear D have?
4. ### math

i need help on ratios, gears and teeth.ex. teeth on driving gear A-35 teeth on driving gear B-?
5. ### math(trig)

1) What's the linear velocity of a point on the tip of a 6-ft propeller turning at 1200 revolutions per min?
6. ### math

A gear with 60 teeth is meshed to a gear with 40 teeth. If the larger gear revolves at 20 revolutions per minute, how many revolutions does the smaller gear make in a minute?
7. ### math corrections

I got a few questions wrong and i would like some explanations on these question: 2. A pair of pants sells for \$6 more than 75% of its price of the pants?
8. ### MTH 156

When two gears are mashed the revolution per minutes (rpm) are inversely proportional to the number of teeth, as show below. In one machine the rpm ratio of the larger gear to the small gear is 4:7 The small gear has 216 teeth In second …
9. ### Algebra

Bambi is restoring a clock with a broken gear. A fragment of the small gear has 5 teeth . a larger unbroken gear has 18 teeth and is 2cm in dia.She knows that for every 2 times the large gear turns the smaller gear turns 3 times. How …
10. ### math

the speed of a gear wheel varies inversely as the number of teeth of the gear. if a gear wheel which has 48 teeth makes 3 revolutions per minute. how many revolutions per minute will a gear wheel with 96 teeth make?

More Similar Questions