physics

posted by .

One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to the tabletop. Two forces, both parallel to the tabletop, are applied to the stick in such a way that the net torque is zero. The first force has a magnitude of 2.00 N and is applied perpendicular to the length of the stick at the free end. The second force has a magnitude of 6.00 N and acts at a 27.8o angle with respect to the length of the stick. Where along the stick is the 6.00-N force applied? Express this distance with respect to the end of the stick that is pinned.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics-torques

    Suppose that a meter stick is balanced at its center. A 0.27-kg is positioned at 18 cm from the left end of the meter stick. Where should a 0.28 kg mass be placed to balance the 0.27 kg mass?
  2. College Physics

    Calculate the rotational inertia of a meter stick, with mass 0.58 kg, about an axis perpendicular to the stick and located at the 43 cm mark. (Treat the stick as a thin rod.) I know I = (1/12)(M)(L^2) and then I need to use the parallel-axis …
  3. physics

    A meter stick is held vertically with one end on the floor and is then allowed to fall. Find the speed of the other end when it hits the floor, assuming that the end on the floor does not slip. (Hint: Consider the stick to be a thin …
  4. physics

    The meter stick in the drawing can rotate about an axis located at the 20.0-cm mark. The axis is perpendicular to the screen. A force F acts at the left end; the force is perpendicular to the meter stick and has a magnitude of 175 …
  5. physics

    One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to the tabletop. Two forces, both parallel to the tabletop, are applied to the stick in such a way that the net torque is zero. The first …
  6. physics

    A thin uniform stick having a mass of 0.680 kg and a length of 1.50 m is at rest, hanging vertically from a strong, fixed hinge at the uppermost end of the stick. The stick is free to swing back and forth in an Up-Down-East-West plane. …
  7. College Physics

    A uniform meter stick of mass M has an empty paint can of mass m hanging from one end. The meter stick and the can balance at a point 19.9 cm from the end of the stick where the can is attached. When the balanced stick-can system is …
  8. phyics

    One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to the tabletop. Two forces, both parallel to the tabletop, are applied to the stick in such a way that the net torque is zero. The first …
  9. PHYICS

    One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to the tabletop. Two forces, both parallel to the tabletop, are applied to the stick in such a way that the net torque is zero. The first …
  10. Physics

    A rod is lying on the top of a table. One end of the rod is hinged to the table so that the rod can rotate freely on the tabletop. Two forces, both parallel to the tabletop, act on the rod at the same place. One force is directed perpendicular …

More Similar Questions