Physics

posted by .

A half-atwood machine is constructed, as shown in the drawing below. The table is NOT frictionless, M1 is 50 grams, and M2 is 30 grams. Mass M2 descends 32 cm in 18 seconds. Find the tension in the wire.

• Physics -

where is that drawing?we wnt 2 c it

Similar Questions

1. physic

Hi!An object with mass m1 = 5.00 kg, rests on a frictionless horizontal table and is connected to a cable that passes over a pulley and is then fastened to a hanging object with mass m2 = 10.0 kg, as shown in the figure below. Find …
2. physics

an atwood machine is set up with m1=234 grams and m2=485 grams. the height of m2 above the floor is 137 cm, and the system is released from rest. the pulley is frictionless. what is the acceleration of this system?
3. Physics

In an Atwood machine, one block has a mass of M1 = 520 g and the other has a mass of M2 = 320 g. The frictionless pulley has a radius of 4.6 cm. When released from rest, the heavier block moves down 51 cm in 1.00 s (no slippage). What …
4. Physics

In an Atwood machine, one block has a mass of M1 = 520 g and the other has a mass of M2 = 320 g. The frictionless pulley has a radius of 4.6 cm. When released from rest, the heavier block moves down 51 cm in 1.00 s (no slippage). What …
5. physics

When two objects of unequal mass are hung vertically over a frictionless pulley of negligible mass, as shown below, the arrangement is called an Atwood machine. Determine a) the magnitude of the acceleration of the two objects and …
6. college physics

When two objects of unequal mass are hung vertically over a frictionless pulley of negligible mass, as shown below, the arrangement is called an Atwood machine. Determine a) the magnitude of the acceleration of the two objects and …
7. Physics

I wondered if someone would check my work concerning an Atwood's Machine. (I am led to believe the answers for these two questions should be the same but I'm not coming out that way.)Thank you! 8.) Caluclate the tension in the Atwood's …
8. Physics

An Atwood's machine consists of two crates of different masses. If the pulley is frictionless and massless along with a string of negligible mass, find the acceleration of the crates and the tension in the string
9. physics

Two wires are anchored at both ends. Wire 1 has a mass of 105 grams and a length of 6.9 m. Wire 2 has a mass of 60 grams, a length of 20 m, and a tension of 143 N. What must be the tension in Wire 1 if its third harmonic is to equal …

On an atwood machine, which mass has a higher momentum - the hanging mass or the mass on the table?

More Similar Questions