job related

posted by .

A gable roof with a slope of 9 inches per foot has a rake slope factor of 1.25. If the run is 10 feet and the eaves length is 30 feet. What is the roof area in sq feet. a 150 b 1500 c 300 or d 750

• job related -

If the slope is 9 inches per foot (run), then the roof is 15" per foot run.
I suppose rake factor is the ratio of roof length to rise, which works out to 1.25 in this case.

The roof area (for one sloping face) is therefore
(15"/9")*10'*30' long
= 500 sq. ft.
If the roof has another sloping face, then double the above.

Similar Questions

1. math,help

What is the equation i have to use for the following question A roof rises 9.75 ft over a horizontal distance of 15.84ft. What is the slope of the roof to the nearest hundredth?
2. Math

If the rise of a roof is 8 feet and the run is 2 feet 8 inches, what is the pitch of the roof in lowest terms when written as a FRACTION?
3. Math

If the rise of a roof is 8 feet and the run is 2 feet 8 inches, what is the pitch of the roof in lowest terms when written as a FRACTION?
4. Math

If the rise of a roof is 8 feet and the run is 2 feet 8 inches, what is the pitch of the roof in lowest terms when written as a FRACTION?
5. math

the roof of a house rises 3 feet vartically for every 5 feet it runs horizontally. what is the slope of the roof?
6. math

The roof of a fence rises 3 feet vetically, for every 5 feet it runs horizontally. What is the slope of the roof?
7. Math

Assume you are working on a house the length of the house is 50 feet, the width is 30 feet, and from the ground to the gable is 10 feet. The height of the triangle prism on top is 6.5 feet. If you are going to shingle the roof of this …
8. Mata

Te slope of the roof is 2/3. If the width of the house is 78 feet,what is the height of the roof, in feet?
9. Trigonometry

a barn has a gable roof whose rafters are 20 feet long. the width of the barn is 30 feet. find the angle that the rafters make with the horizontal. find the area of one of the gable ends.
10. Algebra

Jen is building a doll house for her daughter. She decided that she wanted the slope of the roof to be 3/4. In the blueprint, the roof starts at (-6,10) and the center of the house is at (0,0). Knowing that the peak of the roof will …

More Similar Questions