physics

posted by .

An idealized voltmeter is connected across the terminals of a 15.0- battery, and a 72.5- appliance is also connected across its terminals. If the voltmeter reads 11.0 .

  • physics -

    Incomplete.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    The emf induced across the wing-tips of a flying aircraft is of the order of several millivolts. Can this value be obtained using a sensitive millivoltmeter connected across the wing-tips?
  2. AP PHYSICS

    A 3.0-uF capacitor and a 4.0-uF capacitor are connected in series across a 40.0-V battery. A 10.0-uF capacitor is also connected directly across the battery terminals. Find the total charge that the battery delivers to the capacitors. …
  3. Physics

    A voltmeter of internal resistance of 5000 Ω is connected across the poles of a battery of internal resistance 0.20 Ω. The voltmeter reads 1.4993 volts. What is the actual zero-current emf of the battery?
  4. Physics

    The battery in the circuit diagram has an EMF of 12V and an unknown internal resistance r. Voltmeter V1 is connected across the battery and voltmeter V2 is connected across the switch S. The resistance of the connecting wires and the …
  5. Physics

    The battery in the circuit diagram has an EMF of 12V and an unknown internal resistance r. Voltmeter V1 is connected across the battery and voltmeter V2 is connected across the switch S. The resistance of the connecting wires and the …
  6. engineering science

    The power in a resistor RLOAD of 10 Ω when connected to a 100 volt supply is measured using a voltmeter and ammeter. There are two possible ways of connecting the meters as shown in FIGURE 2. The resistances RA and RV represent …
  7. physics

    Consider a battery that has Vt = 12.0 V when it is not connected to a circuit. When a 10.0- resistor is connected with the battery, the potential difference across the battery’s terminals drops to 10.9 V. What is the internal …
  8. Physics Resistance

    A 65 V. battery is connected across a 65400 ohm and a 37700 ohm resistor connected in series. What is the per cent error in the voltmeter reading when placed across the first resistor, if the voltmeter resistance is 143000 ohms?
  9. physics

    When the lights of an automobile are switched on, an ammeter in series with them reads 9.70 A and a voltmeter connected across them reads 12.20 V. When the electric starting motor is also turned on, the ammeter reading drops to 7.30 …
  10. physics

    1)a galvanometer has a resistance of 40 ohm and is of 3 mA full-scale deflection.how would you modify it to act as a 0-5 A ammeter?

More Similar Questions