Mechanics & hydromechanics

posted by joe

A uniform 98 N pipe is used as a lever. Where the fulcrum must be placed if a 504 N weight at one end is to balance a 192 N weight at the other end?

Respond to this Question

First Name

Your Answer

Similar Questions

  1. Physics

    A 30-lb weight is attached to one end of a 6-ft uniform beam whose own weight is 20-lb. Where is the balance point of the system?
  2. Mechanics & hydromechanics

    Where a 1208 N weight must be hung on a uniform 214 m pole so that a boy at one end supports one-third as much as a man at the other end.
  3. Mechanics & hydromechanics

    A uniform plank AB of length 4.6 m and weight 508 N is suspended by a vertical rope at each end.A girl of weight 305 N stands in the position 1.6 m from one end.Calculate the tension in the rope at one end using the other end as axis …
  4. physics

    A uniform, 264-N rod that is 2.05 m long carries a 225-N weight at its right end and an unknown weight W toward the left end. When W is placed 47.9 cm from the left end of the rod, the system just balances horizontally when the fulcrum …
  5. Physics

    A uniform bar length of 2.0m and weight 1000 N has its center of gravity at its center. The bar is pivoted 0.5m from the right, and supports a weight of 200N on the opposite end (left end). What is the weight needed at right end of …
  6. Physics

    A uniform, 274-N rod that is 2.05m long carries a 225-N weight at its right end and an unknown weight W toward the left end.When W is placed 50.3cm from the left end of the rod, the system just balances horizontally when the fulcrum …
  7. Physics

    A uniform of 100N pipe is use as a lever. When must the fulcrum (supported point) be placed if a 500N weight at one end to balance a 200N weight at the other end?
  8. Physics

    A uniform 100-N pipe is used as lever. Where the fulcrum (the support point) must be placed if a 500-N weight at one end is to balance a 200-N weight at the other end?
  9. Physics

    Consider a lever rod of length 7.96 m, weight 71 N and uniform density. The lever rod is pivoted on one end and is supported by a cable attached at a point 1.74 m from the other end:  The lever rod is in …
  10. Algebra 1

    The weight needed to balance a lever varies inversely with the distance from the fulcrum to the weight. A 120-lb weight is placed on a lever, 5 ft from the fulcrum. What amount of weight, in pounds, should be placed 8 ft from the fulcrum …

More Similar Questions