THEORY OF MACHINE

posted by .

A steel bar 10 m long and 10 cm * 2.5 cm in section. It is subjected to axial pull of 250 KN. Determine the intensities of normal and tangential stresses on a plane section at 60 degree to the longitudinal axis.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Solid Mechanics

    A cast iron block of 5Cm^2 cross section carries an axial compressive load of 50KN.Calculate the magnitude or normal and shear stresses on a plane whose normal is inclined at 30 deg.to the axis of the block,also determine the maximum …
  2. Solid Mechanics

    pls help me to resolve this question A casts iron block of 5cm2 cross section carries an axial load of 50KN. Calculate the magnitude or normal and shear stresses on a plane whose normal is inclined at 30o to the axis of the block. …
  3. THEORY OF MACHINE

    The principal stresses at a certain point in a strained material are 150 MPa and 48 Mpa both tensile. Find normal and tangential stresses on a plane inclined at 20 degree with the major principal plane.
  4. Chem Help!!

    A standard 1.000kg- mass is to be cut from a bar of steel having an equilateral triangular cross section with sides equal to 3.00in. The density of the steel is 7.70g/cm^3. How many inches long must the section of bar be?
  5. physics

    Consider two straight bars of uniform cross section made of the same material. Bar 1 has an axial length of and a square cross section with side length . Bar 2 has an axial length of and a round cross section with diameter. When subjected …
  6. psuchics

    Reaction at support and internal axial force resultant Consider two straight bars of uniform cross section made of the same material. Bar 1 has an axial length 1m of and a square cross section 1mm with side length . Bar 2 has an axial …
  7. Physic

    Reaction at support and internal axial force resultant Consider two straight bars of uniform cross section made of the same material. Bar 1 has an axial length 1m of and a square cross section 1mm with side length . Bar 2 has an axial …
  8. solid mechanics

    a steel bar 10m long and 10cm*10cm in section .it is subjected to an axial pull of 250KN .determine the intensities of normal and tangential stresses on a plane section at 60 degree to the longitudinal axis .
  9. sjc coolege

    A steel bar 10m long and 10cm ×2.5cm in section .It is subjected to an axial pull of 250KN. Determine the intensities of normal and tangential stresses on a plane.
  10. solid mechanics

    A steel plate is subjected to tensile stresses of 200MPa and 150 MPa at right angles to each other. Determine the normal and tangential stresses on a plane inclined at 60 to the 200 MPa stress. Also find the plane on which the resultant …

More Similar Questions