Physics

posted by .

A 3 m long lever is used to lift a mass of 500 kg. If a force of 200 N is to be used to life the mass, then how far from the mass should the fulcrum be placed? Assume the mass and the force act at the ends of the lever.

  • Physics -

    Im looking for the same thing

  • Physics -

    Did anyone get the answer for this problem?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    This is how the problem starts out: A meter stick is placed with the fulcrum at the 50-cm mark. If a 120-g mass is placed at the 25-cm mark and a 25-g mass at the 10-cm mark, where should a 500-g mass be placed to balance the system?
  2. physics

    if a 200-g mass is placed at the 20-cm mark (30 cm from the fulcrum), at what mark should a 500-g mass be placed so that the system balances?
  3. Science (simple machines)

    The plank is 3.6 metres long. It is being used as a lever to lift a 40-kilogram box. This represents a load of 400 newtons. (a) If the fulcrum were placed in the centre of the plank, what downward effort would the man on the right …
  4. Physics

    the input and output of hydraulic jack are respectively 1 cm and 4 cm in diameter. A lever with a mechanical advantage of 6 is used to apply force to the input piston. How much mass can the jack lift if a force of 180 N is applied …
  5. physics

    A fulcrum is placed under the center of a uniform 4.00m long, 3.00kg board. Child A has a mass of 42 kg. This child sits on the left end of the board; Child B has a mass of 26kg. Child B sits on the right end of the board. Where should …
  6. physics

    A NON-UNIFORM board of length L and mass M has a center of mass at 5/6L. If the fulcrum is placed at the center of the board and a block of mass m is placed at the right of the board, then where must a block of mass 3m be placed to …
  7. Physics

    A 3 m long lever is used to lift a mass of 500 kg. If a force of 200 N is to be used to life the mass, then how far from the mass should the fulcrum be placed?
  8. physics

    A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 2.00 m and the distance from the fulcrum to the load is 0.500 m. A graph of resistance force vs. effort force is shown. What is the …
  9. Physics

    Suppose the mass of the stick is 200 g, and a single 500-g mass is to play "solitary seesaw" at the 0-cm mark. Where should the fulcrum be located?
  10. physics

    Find the force (in newton) required to lift a mass of 26 kg load with a wheelbarrow (2nd class lever) with the load at 0.75 m from the fulcrum and being lifted at 1.7 m from the fulcrum, assuming ideal conditions.

More Similar Questions