# science

posted by .

I have made a thermometer which measures temperature by the compressing and expanding of gas in a piston. I have measured that at 100 degrees C the volume of the piston is 20 L. What is the temperature outside if the piston has a volume of 15 L? What would be appropriate clothing for the weather?

## Similar Questions

1. ### physics

A cylinder that has a 40.0 cm radius and is 50.0 cm deep is filled with air at 20.0°C and 1.00 atm. A 21.0 kg piston is now lowered into the cylinder, compressing the air trapped inside. Finally, a 79.0 kg man stands on the piston, …
2. ### Physics AP

In the process from point b to point c, the gas in the engine is heated to a higher temperature. As the gas is heated, it expands pushing the syringe piston up. Let's assume that this process is isobaric. The temperature of the gas …
3. ### thermodynamic

Energy is added to a piston-cylinder arrangement. The piston is withdrawn in such a way that the temperature remains constant. The initial pressure and volume are 200 KPa and 2m^3, respectively. If the final pressure is 100 KPa, determine …
4. ### PHYSICS

A copper vat is 10 m long at room temperature (20 degrees C). How much longer it is when it contains boiling water at 1 atm pressure?
5. ### Physics

A piston contains 1m^3 of helium at a temperature of 250 K and an absolute pressure of 1.0kPa. The following changes are made in sequence: (a) First the volume of the piston is decreased to 0.2 m^3 while the temperature is kept constant, …
6. ### physical science

If a quantity of gas in a piston cylinder has a volume of 0.9 m3 and is initially at room temperature (30°C) and is heated in an isobaric (constant-pressure) process, what will be the temperature of the gas in degrees Celsius when …
7. ### chemistry

A fixed amount of gas initially at 100 K and pressure P1 is expanded from 1 L to 100 L in a piston. The temperature, T2, of the gas at this point is 50 K. The piston is then locked at constant volume V2=100 L and half the gas is pumped …
8. ### Chemistry

I need help with part b here's all information. (a) Chlorine gas is added to a glass cylinder of 2.5 cm in radius, fitted with a movable piston. Gas is added until the piston is lifted 5 cm off the bottom of the glass. The pressure …
9. ### engineering

A thermometer is used to measure the temperature of a gas flow through a pipe. The gas temperature is read at 500°C and the duct temperature is measured to be 350°C. The thermometer is cylindrical with a diameter of 1 mm and an intrusion …
10. ### Physcis

Consider the figure below where a cylinder of an ideal gas is closed by an 16 kg movable piston of area = 60 cm2. When the gas is heated from 30 0C to 100 0C the piston rises by 20 cm. The piston is then fastened in place and the gas …

More Similar Questions