Physics

posted by .

the input and output of hydraulic jack are respectively 1 cm and 4 cm in diameter. A lever with a mechanical advantage of 6 is used to apply force to the input piston. How much mass can the jack lift if a force of 180 N is applied to the lever and efficiency is 80%

  • Physics -

    1410.6 kg

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. PHYSICS

    The input piston of a hydraulic press is 20mm in diameter, and the output piston is 10mm in diameter. an input force of 1.0N will produce an output force of: a- 0.25N b- 0.50N c- 2.0N D- 4.0N
  2. PHYSICS

    The input piston of a hydraulic press is 20mm in diameter, and the output piston is 10mm in diameter. an input force of 1.0N will produce an output force of: a- 0.25N b- 0.50N c- 2.0N D- 4.0N
  3. Physics

    In the process of changing a flat tire , a motorist uses a hydraulic jack. She begins applying a force of F1=8.6N to the input piston. As a result, the output plunger applies a force of F2=305N to the car. The height difference between …
  4. Physics

    A hydraulic jack is used to move an 8896 Newton car. If the area of the output piston is 8 times that of the input piston, how much input force is required to lift the the car?
  5. physics

    a hydraulic jack is used to move an 8896 newton car. if the area of the output piston is 8 times that of the input piston, how much input force is required to lift the car. i did Pi * 8 them multiplied that answer * 8896 then divided …
  6. physics

    A hydraulic jack is used to move an 8896 Newton car. If the area of the output piston is 8 times that of the input piston, how much force is required to lift the car?
  7. physics

    A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston. pounds …
  8. Physics

    A hydraulic lift is used to jack a 780 kg car 15 cm off the floor. The diameter of the output piston is 15 cm, and the input force is 160 N. a)What is the area of the input piston (in m^2)?
  9. physics

    A hydraulic jack has an input piston with a diameter of 1.00 cm, and an output piston with a diameter of 6.00 cm. What weight (in N) can be lifted when a force of 45.8 N is applied to the input piston?
  10. physics

    If the input piston of a hydraulic jack has a radius of 0.005 m, what force is necessary to apply to it to lift a 1500-kg car on the output piston whose radius is 0.5 m?

More Similar Questions