Flotation is widely used for processing all kinds

posted by .

In most instances, flotation is used for processing sulfide auriferous ores whose flotability is quite high and the effect is most notable. By flotation, the gold can be enriched to sulfide ore concentrate as much as possible and the abandoned tailings can be got. The ore dressing cost is also quite low. Flotation process can be used to process polymetallic ores, such as gold-copper, gold-lead, gold-antimony, gold-copper-zinc-lead, etc. For this kind of ore, flotation process can effectively select all kinds of auriferous sulfide ore concentrate and realize to achieve the comprehensive utilization of mineral resources. Moreover, patio process or cyanide process can not be used directly to process the undissolved ores and the joint process which contains the flotation to process the undissolved ores.

Certainly, flotation process has boundedness. For the ores with coarse grains, when the gold grains is larger than 0.2mm and the flotation gold is also larger than 0.2mm, the flotation is quite hard to process the gold ores. For the ore stones which is hard to obtain necessary flotation conditions, if the quartz quality gold ores do not have sulfide, after pulp mixing, stable flotation bubbles are hard to be got so the flotation has some difficulties. In the economic indicators. the flotation process needs a large amount of floating agents so the flotation processing cost is higher than gravity separation and patio process. Get ball mill,beneficiation,Mineral Processing

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. chemistry

    hydrogen sulfide may be prepared in the laboratory by the action of hydrochloric acid on iron (2) sulfide. How much iron (2) sulfide would be needed to prepare 15L of hydrogen sulfide?
  2. Technology

    23. List two examples of tools used in each of these major areas of processing: material, energy, and information processing. I'm stuck! :(
  3. Technology

    23. ? List two examples of tools used in each of these major areas of processing: material, energy, and information processing. Ok, this wasn't so hard: 23. There are a few tools that are used in each of the three major types of processing:
  4. URGENT! chemistry- percentage yield

    heating an ore of antimony sulfide in the presence of iron gives th element antimony and iron(2) sulfide. when 15.0 antimony sulfide reacts with an excess of iron, 9.84 g antimony is produced. what is the percent yield of this reaction?
  5. science

    I have an older furnace dryer which is used for drying copper ore, it operates at a temperature of 1000-to 2500 degrees F.I have low concentrations of hydrogen sulfide in the area.My question is can sulfur dioxide be produced without …
  6. Flotation machine can meet the performance require

    Flotation Machine can be used to separate nonferrous metal, ferrous metal, heavy metal, nonmetallic mine, chemical material and recycling minerals. Each chute can inhale gas, sink magma, separate. No assiting equipments are required, …
  7. Principle processes of flotation separation of Pol

    Direct Preferential Flotation Definition of this method is: separate various helpful minerals in proper order. With its feature of high flexibility, it can adapt the change of ore grade, especially for sulphide ore of high grade. Xilin, …
  8. Direct way to improve yield of ball mill

    The Ball Mill as a general grinding equipment, is widely used in dressing, building materials and chemical industry, ball mill can be divided into dry and wet type two kinds of grinding way. According to the row of ore in different …
  9. chemistry

    One of the reactions involved in the smelting of copper sulfide ores involves copper(I) oxide and copper (I) sulfide: 2Cu2O(solid) + Cu2S(solid) ---> 6Cu(solid) + SO2(gas) Assuming that 35.00 g of copper (I) oxide is heated with …
  10. chemistry

    The first step in the process used to recover zinc metal from zinc sulfide ore is the reaction of zinc sulfide with oxygen gas to produce zinc oxide and sulfur dioxide. 2 ZnS(s) + 3 O2(g) → 2 ZnO(s) + 2 SO2(g) When the external …

More Similar Questions