college chemistry

posted by .

formt he diluted unknown concentration which i found to be 1.50mg/L i have to calculate the [Fe] in the PRIMARY unknown solution... that is placed in a 250mL volumetric flask

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. college chemistry

    An aspirin tablet weighing 0.502 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. …
  2. chemistry

    Transfer the tablet to a clean 125-mL Erlenmeyer flask. Add 10-mL of 1M NaOH and heat the mixture to a gentle boil. Once the solution has cooled to room temperature, transfer it to a 100-mL vol. flask. Using the diluted solution from …
  3. College Chemistry

    48.70 mL of an HCl stock solution was transferred into a 500 mL volumetric flask and filled to the mark. 47.67 mL of the diluted solution was titrated with 0.179 M NaOH and found to have the concentration of 0.885 M. What is the concentration …
  4. Chemistry

    You weigh out 196.07mg ferrous ammounium sulfate (FW 392.14) to prepare 250mL of solution which is 0.002M with respect to that compound. The salt is quantitatively transferred into a 250mL volumetric flask and 8mL of 3M H2SO4 is added …
  5. Chemistry

    Solution A is 2.40M. 20mLs of solution A is transferred to a 250mL volumetric flask and diliuted to volume with water. What is the concentration of the diluted solution?
  6. chemistry

    1. A sample weighing 1.30 mg was analyzed to determine the concentration of a certain compound (FW =292.16 g/mol) using UV/Visible spectrometry. First, the sample was dissolved in 5.00 mL volumetric flask. A 1.00 mL aliquot was drawn …
  7. chemistry

    10.0 mL of a Cu2+ solution of unknown concentration was placed in a 250 mL Erlenmeyer flask. An excess of KI solution was added. Indicator was added and the solution was diluted with H2O to a total volume of 75 mL. The solution was …
  8. ANALYTICAL CHEMISTRY

    A sample weighing 1.25 mg containing a certain compound M (FW 292.16 g/mol) was dissolved in solvent in a 5.00 mL volumetric flask. A 1.00 mL aliquot was drawn up, placed in a 10.00 mL volumetric and diluted to the mark with solvent. …
  9. Chemistry lab

    A 1.340gram sample of an unknown acid, H3A, was placed in a 250.0 mL volumetric flask and diluted to volume with water. A 45.35 mL sample of this acid solution was titrated with 37.77 mL of a 0.1006M NaOH solution. A) Using one set …
  10. Chemistry

    An analytical chemist weighs out 0.225g of an unknown diprotic acid into a 250mL volumetric flask and dilutes to the mark with distilled water. He then titrates this solution with 0.0700M NaOHsolution. When the titration reaches the …

More Similar Questions