Physics

posted by .

Why "weighing" individual atoms is a particular challenge? Using A small beam arranged as a cantilever, can be utilized as part of a sensing device.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Technology

    24. Explain the differences between the four major types of bridges. Include as part of your answer which bridge structure is the stronger. A bridge is a constructed structure vital for transportation. There are two types of bridges: …
  2. Physics

    A uniform beam weighing Wa=1200 N is 3.50 m long and is suspended horizontally by two vertical wires at its ends, as shown in the figure below. A small but dense weight with WL = 550 N is placed on the beam 2.00m from one end, as shown …
  3. vibration

    a uniform cantilever beam of the total mass ml has a concentrated mass M at its free end. determine the effective mass of the beam to be added to M assuming the deflection to be that of a massless beam with a concentrated force at …
  4. strength of materials

    1.a concentrated load p is applied at the end of cantilever.the crosssection of the beam is a square of side "a" and with a hole of diameter "a/2" then deflection at the tip of beam is?
  5. Statics

    A cantilever beam, made of a material with a Young's modulus, E with a rectangular cross section with a moment of inertia I, is under a uniformly distributed load, q, across the length L of the cantilever at a point load P at the free …
  6. Physics

    A 20.0 m long uniform beam weighing 800 N rests on walls A and B, as shown in the figure below.(a) Find the maximum weight of a person who can walk to the extreme end D without tipping the beam.(b) Find the forces that the walls A …
  7. physics

    A uniform beam weighing 1300N is attached to a vertical wall so that it is perfectly horizontal. the beam is 8 m long. A support race is anchored to the wall beneath the beam, making contact with the beam 3 m away from the wall at …
  8. Physics

    a uniform beam 6.0m long and weighing 4kg rest support p and q place left and right 1.0m of beam of weight from each of the beam weight of mass 10kg and 8kg and are placed near p and q respectively on each of the beam. calculate the …
  9. Physics

    a uniform beam 6.0m long and weighing 4kg rest support p and q place left and right 1.0m of beam of weight from each of the beam weight of mass 10kg and 8kg and are placed near p and q respectively on each of the beam. calculate the …
  10. Statics

    A cantilever beam, made of a material with a Young's modulus, E with a rectangular cross section with a moment of inertia I, is under a uniformly distributed load, q, across the length L of the cantilever at a point load P at the free …

More Similar Questions