Post a New Question

Physics

posted by .

A force of 60 N is exerted on one end of a 1.0-m-long lever. The other end of the lever is attached to a rotating rod that is perpendicular to the lever. By pushing down on the end of the lever, you can rotate the rod. If the force on the lever is exerted at an angle of 30degrees, what torque is exerted on the lever?

  • Physics -

    .. an angle of 30 degrees relative to what direction?

  • Physics -

    30 newtons

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Math

    A worker tearing down a barn uses a crowbar 4feet long with the shorter end being 2 inches from the fulcrum. If the worker can exert a force of 150lbs at one end of the crowbar, how great a force can be exerted at the other end?
  2. Physics

    A viaduct is being re-levelled by using a jackscrew with a pitch of 5mm. The mass of the top slab of the viaduct is 20 tonnes (20000kg) and its length is 40m. The lever arm used to turn the jackscrew is 60 cm long. Calculate the effort …
  3. Physics

    A viaduct is being re-levelled by using a jackscrew with a pitch of 5mm. The mass of the top slab of the viaduct is 20 tonnes (20000kg) and its length is 40m. The lever arm used to turn the jackscrew is 60 cm long. Calculate the effort …
  4. physics

    A viaduct is being re-levelled by using a jackscrew with a pitch of 5mm. The mass of the top slab of the viaduct is 20 tonnes (20000kg) and its length is 40m. The lever arm used to turn the jackscrew is 60 cm long. Calculate the effort …
  5. physics

    Ayesha exerts a force of 186 N on a lever to raise a 2.70 × 103-N object to a height of 29.0 cm. If the efficiency of the lever is 83.3 percent, how far does Ayesha move her end of the lever?
  6. physics

    A boy exerts a force of 210 N on a lever to raise a 1.25 103 N rock a distance of 12 cm. If the efficiency of the lever is 88.7%, how far did the boy move his end of the lever?
  7. physics

    A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m. Show that the weight of the load is 360 N.
  8. physical science

    A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m. Show what the weight of the load is 360N.
  9. phycis

    59. A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m. Show that the weight of the load is 360 N.
  10. engineering

    A lever is used to lift a heavy load. A 50 N force pushes one end of the lever down 1.2 m and the load rises 0.2 m. Calculate in weight of the load. Neglect friction

More Similar Questions

Post a New Question