math

posted by .

you hav three boards and one board is 48" long .and the one board btween the top and bottom board is 2and 1/2" long. how many boards will it take to cover those 2 boads

  • math -

    Go do it yourself it provides good support when you take your test. You can't just ask for help on your homework and let someone else figure it out for you, you will never learn how to do it. I hope you understand how to do it yourself and if you do understand you would most defiantly get an A. Lastly good luck on it, I hope you actually tried it and for last resort chose the internet.


    Love Nziss,

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Statistics

    Background: A machine cuts wood boards to a thickness of 25 millimeters with an accepter margin of error of +/-0.6 ml. (Assume process can be distributed by normal distribution.) The acceptable range of thicknesses for the boards is …
  2. Math

    I'm completely confused, please help explain how my teacher got this answer. How many board feet is the walking surface of my deck?
  3. Physics

    The board sandwiched between two other boards weighs 92.6 N. If the coefficient of friction between the boards is 0.587, what must be the magnitude of the horizontal forces acting on both sides of the center board to keep it from slipping …
  4. Math- Geometry

    A board 20 feet long is cut into two boards with lengths in ratio of 5 to 2. To the nearest tenth of a foot, how lng is the longer piece of the board?
  5. Physics

    An indestructible bullet 1.85 cm long is fired straight through a board that is 11.5 cm thick. The bullet strikes the board with a speed of 400 m/s and emerges with a speed of 285 m/s. (a) What is the average acceleration of the bullet …
  6. algebra

    If shorter boards are cut from one long board, how many cuts will it take to have 12 shorter boards if there is no waste left?
  7. Math

    Eleanor and Max used two rectangular wooden boards to make a set for the school play. 1 board was 6 ft long, the other was 5 1/2 ft long. The 2 boards had equal widths. The total area of the set was 60 3/8 square ft. What was the width?
  8. math

    a carpenter has several boards of equal length. he cuts 3/5 of each board . after cutting the boards the carpenter notices that he has enough pieces left over to make 4 of the original boards. how many boards did the carpenter start …
  9. math

    Neil needs to cut 3 long boards into 9 smaller boards. The first is 10 ft, the second is 16 ft, and the third is 18 ft. The table lists the smaller boards Neil needs. Use a drawing to show how he can divide the 3 boards so there is …
  10. Math

    She has one board that is 3m7cm long and another board that is 3m 91cm find the total length of he two boards in meters

More Similar Questions