Physics

posted by .

if a force of 163 newtons is applied to the end of the jack handle the end moves down 15 cm. If lifting part of the jac raises the car bumper 1.75 cm what force is the jack exerting on the bumper

Similar Questions

1. Engineering

Can anyone tell me the formula and what the symbols mean for the following problems?
2. Engineering

You are given a hydraulic jack which you'd like to keep in your car in case you have a flat. Your vehicle weighs 4500lbs, and you know the jack will have to lift 1500 lbs when you put it under the axle. The hand end cylinder of the …
3. Physics

A person is making homemade ice cream. She exerts a force of magnitude 23 N on the free end of the crank handle, and this end moves in a circular path of radius 0.35 m. The force is always applied parallel to the motion of the handle. …
4. Physics

A jack exerts a vertical force of 4.5 x 10^ 3 newtons to raise a car 0.25 meter. How much work is done by the jack?
5. Fluid Mechanics

The components and their dimensions of a hydraulic jack are shown in the figure. The specific gravity of the fluid in the jack is SG=0.8. A force F=400 N is applied at the left end of the handle, which is hinged at the right end. Determine: …
6. Physics

A hydraulic lift is used to jack a 780 kg car 15 cm off the floor. The diameter of the output piston is 15 cm, and the input force is 160 N. a)What is the area of the input piston (in m^2)?
7. physics

A mechanic lifts the front of a car with a jack. Find the mechanical advantage if a force of 30.0 lb on the jack handle lifts the car that weighs 960 lb
8. Physics

A force of 32 N is applied at the end of a wrench handle that is 27 cm long. The force is applied in a direction perpendicular to the handle as in the diagram. (a) What is the torque applied to the nut by the wrench?
9. Physics

A man uses a lever jack to lift a 2.00 × 10^3 kg car to change a tire. Each stroke of the jack lifts the car a distance of 5.00 × 10^(-3) m. The vertical displacement of the handle is 0.75 m for each stroke. How much total force …
10. Physics

A force of 100 N is applied straight down to lower a handle from 45˚ above the horizontal to 45˚ below it. The handle is 1 m long and the force is applied at its end throughout the motion. What is the rate of change of the …

More Similar Questions