Physics
posted by Ryan .
1. A model of a helicopter rotor has four blades, each 2.50 m in length from the central shaft to the blade tip and is rotated in a wind tunnel at 1800 rev/min,
a. what is the linear speed of the blade tip in m/s?
b. what is the radial acceleration of blade tip?

a. R*w
b. R*w^2
where R = 2.50 m, and
w = 188.5 radians/sec (from the rev/min number)
Respond to this Question
Similar Questions

Physics
a model of a helicopter rotor has four blades, each 3.40 m in length from the central shaft to the tip of the blade. The model is rotated in a wind tunnel at 550 rev/min. A) what is the linear speed, in m/s of the blade tip? 
Physics
The diameters of the main rotor and tail rotor of a singleengine helicopter are 7.59 m and 0.98 m, respectively. The respective rotational speeds are 456 rev/min and 4143 rev/min. Calculate the speeds of the tips of both rotors. main … 
Physics
The diameters of the main rotor and tail rotor of a singleengine helicopter are 7.59 m and 0.98 m, respectively. The respective rotational speeds are 456 rev/min and 4143 rev/min. Calculate the speeds of the tips of both rotors. main … 
PHysics
The tip of a helicoptor rotor blade can reach speeds of roughly 300 mph (130 m/s). It takes about 30 seconds to get them up to speed and they have a typical radius of 20 feet (6 m). What is the average angular acceleration of the rotor … 
physics
A ceiling fan has four blades, each with a mass of 0.40 kg and a length of 65 cm. Model each blade as a rod connected to the fan axle at one end. When the fan is turned on, it takes 4.45 s for the fan to reach its final angular speed … 
Physics
The diameters of the main rotor and tail rotor of a singleengine helicopter are 7.70 m and 0.99 m, respectively. The respective rotational speeds are 454 rev/min and 4,147 rev/min. Calculate the speeds of the tips of both rotors. … 
physics
A model of a helicopter rotor has four blades, each 3.40 {m} in length from the central shaft to the tip of the blade. The model is rotated in a wind tunnel at 580 {rev/min}. What is the radial acceleration of the blade tip, expressed … 
PHYSICS HELP!
A typical propeller of a turbine used to generate electricity from the wind consists of three blades as in the figure below. Each blade has a length of L = 33 m and a mass of m = 415 kg. The propeller rotates at the rate of 21 rev/min. … 
physics
While waiting to board a helicopter, you notice that the rotor's motion changed from 340 rev/min to 265 rev/min in one minute. Assuming that this acceleration remains constant, calculate how much longer (in seconds) it will take for … 
physics
If each of the three rotor helicopter blades is L = 3.69m long and has a mass of m = 159kg, calculate the moment of inertia of the three rotor blades about the axis of rotation.