posted by .

Carbon dioxide gas has a solubility of 0.0972 g/100 g H2O at 40 degrees celsius. Expressed in parts per million, this concentration is closest to...

(1)0.972 ppm
(2)9.72 ppm
(3)97.2 ppm
(4)972 ppm

  • Chemistry -

    The easiest way to do these is to remember the conversion that
    1 ppm = 1 mg/L
    0.0972 g/100 g H2O = 0.0972/100 mL = 0.972 g/L = 972 mg/L = 972 ppm

  • Chemistry -


  • Chemistry -

    972 ppm

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. chem

    The units of parts per million (ppm) and parts per billion (ppb) are commonly used by environmental chemists. In general, 1 ppm means 1 part of solute for every 106 (one million) parts of solution. Mathematically by mass: ppm = µg …
  2. Chemistry

    The Label on a one pint bottle of water lists the following components. If the density is the same as pure water and you drink 3 bottles of water in one day, how many milligrams of each component will you obtain?
  3. chemistry

    Calculate the concentration of SO2(ppm) that must be reached in polluted air (in ppm) if the dissolved gas is to produce a pH of 3.2 in raindrops without any oxidation of the gas.
  4. hypothesis testing by mean levels

    hi everyone... i have this homework.. i tried to solve it... can anyone check if it's right or not, please?
  5. Chemistry

    A 200. gram sample of a salt solution contains 0.050 grams of NaCl. What is he concentration of the solution in parts per million?
  6. Stat Help

    The Momoland Springs Company claims that there are at most 1 ppm (parts per million) of benzene in their water. Test at a=.10 n=25 = 1.10 ppm s = .20 ppm
  7. analytical chemistry

    Suppose a 4.272 g soil sample undergoes an extraction with 50 ml of extracting solvent to remove the lead. This 50 ml was then diluted to 250 ml and tested by atomic absorption technique. The concentration of lead in this diluted extract …
  8. chemistry

    n the spectroscopic analysis of many substances, a series of standard solutions of known concentration are measured to generate a calibration curve. How would you prepare standard solutions containing 10.0, 25.0, 50.0, 75.0, and 100. …
  9. Chemistry -Dr.Bob

    Toxic chemicals in drinking water usually are reported and a safety level specified in units of parts per million (ppm) by mass. What is the molar concentration of arsenic in a water sample that has 1ppm arsenic (As)?
  10. Math

    If current trends of burning fossil fuels and deforestation continue, then future amounts of atmospheric carbon dioxide in parts per million (ppm) will increase exponentially. In the year of 1990, there was 353 ppm. A)In the year of …

More Similar Questions