physics

posted by .

When a 19.9 kg wheel with an angular speed of 3.10 rad/s is disconnected from a motor, a 0.124 N · m frictional torque slows the wheel to a stop. If the wheel has radius of 0.71 m, how long will it take for the wheel to come to rest after being disconnected from the motor?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A 2000kg ferris wheel accelerates from rest to an angular speed of 2.0 rad/s in 12 secs. Approximate the ferris wheel as a circular disk with a radius of 30m. what iss the net torque on the wheel
  2. Physics

    A steel bicycle wheel (without the rubber tire) is rotating freely with an angular speed of 18.00 rad/s. The temperature of the wheel changes from -100.0 to +300.0 degrees Celcius. No net external torque acts on the wheel, and the …
  3. Physics/Chemistry

    A steel bicycle wheel (without the rubber tire) is rotating freely with an angular speed of 18.00 rad/s. The temperature of the wheel changes from -100.0 to +300.0 degrees Celcius. No net external torque acts on the wheel, and the …
  4. physics

    A wheel of mass 0.47 kg and radius 49 cm is spinning with an angular velocity of 24 rad/s. You then push your hand against the edge of the wheel, exerting a force F on the wheel as shown in the figure below. If the wheel comes to a …
  5. Physics. PLEASE HELP!!

    Consider a wheel (solid disk) of radius 0.748 m, mass 16 kg and moment of iner- tia 1/2 MR^2 . The wheel rolls without slipping in a straight line in an uphill direction 27 above the horizontal. The wheel starts at angular speed 20.5882 …
  6. physics

    An electric motor rotating a workshop grinding wheel at a rate of 9.80 101 rev/min is switched off. Assume the wheel has a constant negative angular acceleration of magnitude 2.00 rad/s2. (a) How long does it take for the grinding …
  7. Physics

    A 6 kg grinding wheel of radius 0.2 m rotates at a constant rotational frequency of 4 rad/s when an object makes contact with the outer edge of the wheel. Friction causes the wheel to stop in 2 seconds. What is the average torque on …
  8. Science

    A 6 kg grinding wheel of radius 0.2 m rotates at a constant rotational frequency of 4 rad/s when an object makes contact with the outer edge of the wheel. Friction causes the wheel to stop in 2 seconds. What is the average torque on …
  9. Physics

    A potter’s wheel is spinning with an angular speed of 4.5 rad/s. When the potter stops working, the wheel slows down with an angular acceleration of -0.5 rad/s 2. Calculate the angle, in radians, through which the wheel has turned …
  10. Physics

    A student holds a bike wheel and starts it spinning with an initial angular speed of 7.0 rotations per second. The wheel is subject to some friction, so it gradually slows down. In the 10-s period following the inital spin, the bike …

More Similar Questions