Post a New Question

Math

posted by .

Find the volume of steel required to make the beam
B=108cm2

Length is 80cm

  • Math -

    Surely you know that volume = base * height. I mean, you are only given two pieces of data. Use yer noggin to work with the formulas you have.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the …
  2. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the …
  3. Pre Cal

    An open box is formed from an 80cm by 80cm peice of metal by cutting four identical squares from the corners and folding up the sides. Express the volume of the box in terms of x. Then describe how you could find the maximum possible …
  4. physics

    1.An elastic cord is 5.0m long and 1.0cm in diameter and acts as a spring with spring constant 70 N/m, what is the young's modulus for this material?
  5. Physics

    An 80kg construction worker sits down 2.0 meters from the end of a 1450kg steel beam to eat his lunch. The beam is 6.0 m length total. A cable is supporting the beam and is rated at 15,000 N and is at a 30 degree angle to the beam. …
  6. mechanics of materials

    A steel beam with a rectangular cross section is bent to form an arc of a circle of radius 6 m. Calculate the maximum stress in the beam given that the depth of the beam is 6 mm and the Young's modulusfor steel is 210 MPa
  7. physics

    A 5.00-meter steel beam of uniform cross section and composition weighs 100 N. What is the minimum force required to lift one end of the beam?
  8. Physics Classical Mechanics

    A uniform steel beam of mass m1= 300.0 kg is held up by a steel cable that is connected to the beam a distance L= 5.0 m from the wall, at an angle θ= 40.0∘ as shown in the sketch. The beam is bolted to the wall with an unknown …
  9. Physics- tension

    An 63 kg construction worker is sitting 2.0 m from the end of a 1435 kg steel beam to think about the state of the world. Find the tension in the cable that is supporting the beam. Am I required to use the formula T1=sin(theta)*m*g?
  10. Algebra

    A rectangle has a width which is 2/3 of its length. Find its length if its perimeter is 80 cm. Find its dimensions. P = 2L + 2W 80cm = 2L + 2 (2/3)L 80cm =6/3 L + 4/3L 80cm = 10/3 L 80. 3/10 = L 24cm =L or L= 24 cm W = 2/3 .24 W = …

More Similar Questions

Post a New Question