physics

posted by .

write down the formula and calculate the increase in length of a steel beam 17.5 metres in length under the following conditions;
1. the temperature of the steel has risen from 18 degrees celcius to 63 degrees celcius

  • physics -

    Increase = a(Tf-To)Lo =
    11*10^-6(63 - 18)17.5=0.0087 meters.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Math

    An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees …
  2. Math

    An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees …
  3. physics

    A metal rod has a length of 4m at 50 degrees celcius and a length of 6m at 200 degrees celcius. What is it's length at 20 degrees celcius?
  4. physics

    a steel beam is 12.0 m long when installed at 23 degrees celsius.Find the change in the beam's length if the temperature changes from -32.0 degrees celcius to 55 degrees celcius?
  5. physics

    two slabs of thickness 10cm and 2ocm are made of rteel and copper respectively.they are in thermal contact with each oth.the far end of the steel is at 100 degrees celcius amd that of copper is at 0 degrees celcius.determine the temperature …
  6. physics

    two slabs of thickness 10cm and 2ocm are made of rteel and copper respectively.they are in thermal contact with each oth.the far end of the steel is at 100 degrees celcius amd that of copper is at 0 degrees celcius.determine the temperature …
  7. Chemistry

    How many joules (J) are needed to increase the temperature of 43.0g of aluminum from 25 degrees celcius to 50 degrees celcius?
  8. physics

    4.A steel rod is heated to 200 degrees Celcius and is then rigidly clamped at both ends and allowed to cool. Determine the temperature at which the rod will break if the tensile strength, coefficient of linear thermal expansion and …
  9. science

    a cylinder of diameter 1cm at 30 degrees celcius is to be slid into a steel plate. the hole has a diameter 0.9997cm at 30 degrees celcius. to what temperature must the plate be heated?
  10. Chemistry (Urgent)

    Ksp of PbI2 at 25 degrees celcius and 15 degrees celcius is 7.5×10^-8 and 7.5×10^-9 respectively. (Pb=207 I=127) 1) write an expression for the equilibrium of PbI2 2)write an equation for the Ksp of PbI2 3)calculate the solubility …

More Similar Questions