science

posted by .

Question:

If you have an electric motor on a bench and hook it to the power the shaft turns. If you put the shaft in a vise the casing of the motor will turn.
Now:...put this motor in free space no gravity and attach a battery for power..when the power is turned on will the motor shaft turn? will the casing turn? What happens??? thanks

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    An electric motor has 72 turns of wire wrapped on a rectangular coil, of dimensions 3cm by 4cm. Assume that the motor uses 14A of current and that a uniform 0.5T magnetic field exists within the motor. 1)What is the maximum torque …
  2. physics

    I have to build a mini solar car for a school project and i have three solar cells that i bought. whenever i hook up the solar cells i get a reading between 1.5-1.8 volts, but when i hook it up to the motor it wont start it. According …
  3. algebra

    The power (P) required to run a motor is equal to the voltage (E) applied to that motor times the current (I) supplied to the motor. If the motor data says the motor uses 180 watts of power and the voltage applied to the motor is 120 …
  4. College Physics

    At t=0 the current to a dc electric motor is reversed, resulting in an angular displacement of the motor shaft given by theta(t)= 258t - 20.4t^2 - 1.47t^3 How many revolutions does the motor shaft turn through between the time when …
  5. physics

    2. At time t =0, the current to the dc motor is reversed, resulting in an angular displacement of the motor shaft given by θ = (198 rad/s)t – (24 rad/s2)t2 – (2 rad/s3)t3 a. At what time is the angular velocity of the motor …
  6. science

    At time t =0, the current to the dc motor is reversed, resulting in an angular displacement of the motor shaft given by è = (198 rad/s)t – (24 rad/s2)t2 – (2 rad/s3)t3 (15 marks) a. At what time is the angular velocity of the …
  7. physics

    A 120-V motor has mechanical power output of 2.20 hp. It is 92.0% efficient in converting power that it takes in by electrical transmission into mechanical power. (a) Find the current in the motor (A) (b) Find the energy delivered …
  8. Physic

    A vacuum pump is connected to its electric motor by a belt drive (Fig. 9-40, not to scale). The motor rotates at a rate of 1000 rev/min and the diameter of the motor shaft is 2.9 cm. How large (diameter) should the pulley be if it …
  9. physics

    An electric motor runs at a constant rotational frequency of 3000 r/min and has the load of 75 Nm and a 5,0 Nm extra load of friction and gear. The efficiency of the motor is 78%. a) What is the input power of the motor?
  10. Physics

    An electric motor runs at a constant rotational frequency of 3000 r/min and has the load of 75 Nm and a 5,0 Nm extra load of friction and gear. The efficiency of the motor is 78%. a) What is the input power of the motor?

More Similar Questions