# vibration

posted by .

a uniform cantilever beam of the total mass ml has a concentrated mass M at its free end. determine the effective mass of the beam to be added to M assuming the deflection to be that of a massless beam with a concentrated force at the end, and write the equation for its fundamental frequency

## Respond to this Question

 First Name School Subject Your Answer

## Similar Questions

1. ### Physics

A beam of mass mb = 10.0 kg, is suspended from the ceiling by a single rope. It has a mass of m2 = 40.0 kg attached at one end and an unknown mass m1 attached at the other. The beam has a length of L = 3 m, it is in static equilibrium, …
2. ### Physics

A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.1 kg and the sign has a mass of ms = 16.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the horizontal …
3. ### strength of materials

1.a concentrated load p is applied at the end of cantilever.the crosssection of the beam is a square of side "a" and with a hole of diameter "a/2" then deflection at the tip of beam is?
4. ### Statics

A cantilever beam, made of a material with a Young's modulus, E with a rectangular cross section with a moment of inertia I, is under a uniformly distributed load, q, across the length L of the cantilever at a point load P at the free …
5. ### math

Consider a cantilever beam of length l loaded by force P at the free end. If the deflection is given by y(x)=(P/6EI)(x³-3/x²) m Find the deflection and slope of the deflection at the free end of x=l
6. ### Physics

A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.7 kg and the sign has a mass of ms = 17.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the horizontal …
7. ### Physics 101

on a uniform beam of length 5m, hangs a mass 30kg at one end. the beam then balances at a point 1.5m from this end. find the mass of the beam(g=10ms-1)
8. ### Physics

Hi everybody! I need this quick answer, please help! The beam AB in the figure has length 3L and uniform section stiffness EI. The beam is fixed at A(x=0) and loaded by an upward concentrated force, P, applied at its free end B(x=3L). …
9. ### Statics

A cantilever beam, made of a material with a Young's modulus, E with a rectangular cross section with a moment of inertia I, is under a uniformly distributed load, q, across the length L of the cantilever at a point load P at the free …
10. ### PHYSICS! -need help!-

A gymnast with a mass of 52 kg stands on the end of a uniform balance beam as shown in the figure. The beam is 5.50 m long and has a mass of 250 kg. Each support is 0.54m from the end of the beam. What is the force on the beam due …

More Similar Questions