# physics

posted by .

What must be the radius of a 4 kg circular disk if it is to have the same moment of inertia as a 1 kg rod 1 M long and pivoted at its midpoint?

## Similar Questions

1. ### PHYSICS--SHM

A pendulum consists of a uniform disk with radius r = 10 cm and mass 545 g attached to a uniform rod with length L = 500 mm and mass 300 g. (figure: one end of the rod attach to a pivot and the other end attach to the center of the …
2. ### physics

A curcial part of a piece of machinery starts as a flat uniform cylindrical disk of radius R0 and mass M. It then has a circular hole of radius R1 drilled into it. The hole's center is a distance h from the center of the disk. Find …

A thin uniform rod (length = 1.3 m, mass = 4.1 kg) is pivoted about a horizontal frictionless pin through one of its ends. The moment of inertia of the rod through this axis is 1/3 m L2. The rod is released when it is 55° below the …
4. ### Physics 121

The disk has mass 10kg and radius 0.25m. The rod has mass 5kg, length 0.5m and radius 0.05m. The rod is split down the middle and is hinged so that its two halves can lay flat against the disk. Suppose that the disk and rod are initially …
5. ### Physics 121

The disk has mass 10kg and radius 0.25m. The rod has mass 5kg, length 0.5m and radius 0.05m. The rod is split down the middle and is hinged so that its two halves can lay flat against the disk. Suppose that the disk and rod are initially …
6. ### Physics

A thin uniform rod (length = 1.3 m, mass = 3.2 kg) is pivoted about a horizontal frictionless pin through one of its ends. The moment of inertia of the rod through this axis is (1/3)mL2. The rod is released when it is 50° below the …
7. ### Physics

A solid circular disk has a mass of 1.67 kg and a radius of 0.144 m. Each of three identical thin rods has a mass of 0.351 kg. The rods are attached perpendicularly to the plane of the disk at its outer edge to form a three-legged …
8. ### physics

A toy consisting of two balls, each m = 0.56 kg, at the ends of a l = 0.73 m long, thin light-weight rod is shown below. Find the moment of inertia of the toy. The moment of inertia is to be found about the center of the rod.
9. ### Physics

Consider a rod plus disc system. The rod has a total length L =1.30 m, while the disc has a radius of R = L/2. The pivot is at P where the distance between P and the end of the rod is L/4. Point O is at the center of the disc, and …
10. ### Physics

Consider the rods plus disc system shown in the Figure. The rod has a length L =0.50 m, and mass M = 0.270kg. The large disc has a radius of R = 0.130m and mass m=0.810kg. The second disk should be treated as a point mass of 0.405kg. …

More Similar Questions

Post a New Question