posted by .

a chain pulls tangentially on a 33.4kg uniform cylindrical gear with tension of 70.1 N. the chain is attached along outside radius at 0.794m from the axis of rotation. starting from rest gear takes 1.59 s to reach rotational speed of 1.08 rev/s. what is total frictional torque opposing rotation of gear?

  • Physics -

    Are you also known as Anono?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. drive-ing problem

    hi this is my problem... A shaft turning at the 1800 r/min is coupled to a gear with 80 teeth, matching a gear with 62 teeth. In turn this gear is fitted to an intermediate shaft driving a gear with 40 teeth. This gear in turn drives …
  2. 9th grade science

    if the turns of the output gear over the turns of the input gear is equal to the number of teeth on the input gear over the number of teeth on the output gear, the input gear has 36 teeth and the output has 10, the output gear has …
  3. math(trig)

    1) What's the linear velocity of a point on the tip of a 6-ft propeller turning at 1200 revolutions per min?
  4. Physics

    A large uniform chain is hanging from the ceiling, supporting a block of mass 48kg. The mass of the chain itself is 15 kg, and the length of the chain is 2.6 m. The acceleration of gravity is 9.81 m/s^2 Find the tension in the chain …
  5. Intergated chemistry/physics

    Draw a setup containing 3 gears. For every turn of the input gear, you need the output gear to spin 9 times. The drawing doesn't have to be perfect, but make sure to label the input gear, the output gear, and the number of teeth on …
  6. Math

    2 Gears are in their starting position. Gear 1 has 6 teeth. Gear 2 has 8 teeth. As gear 1 turns, it causes gear 2 to turn at a different rate. Gear 1 is rotated until the two gears are back at starting position. What is the minimum …
  7. general physics

    An axle of a mass of 10 kg, length 10 cm and radius .1 m is free to rotate about the axis which runs the length of the axle, throuhh it's center. A chain of mass 4kg is fastened to the axle at one end, wound exactly 6 times around …
  8. physics

    A w1 = 255 N bucket is lifted with an acceleration of a = 2.00 m/s2 by a w2 = 105 N uniform vertical chain. A.Find the tension in the top link of the chain. B.Find the tension in the middle link of the chain. C.Find the tension in …
  9. Algebra

    Bambi is restoring a clock with a broken gear. A fragment of the small gear has 5 teeth . a larger unbroken gear has 18 teeth and is 2cm in dia.She knows that for every 2 times the large gear turns the smaller gear turns 3 times. How …
  10. value

    if gear A has 3 teeth and drives gear B with 75teeth,how many times does gear A rotate for each rotation of B?

More Similar Questions