chemistry

posted by .

500 grams of water at 0 degrees C was heated to a boiling in a large pot. how much energy was needed? what was the temperature change and Heat energy

  • chemistry -

    heat needed was q = mass water x specific heat water x (100-0) = ??
    delta T = 100 C.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. chemistry

    A propane barbeque is used to heat up 400g of water in an aluminum pot until it is boiling. Using the following information, calculate the molar enthalpy of propane. You can assume the temperature of the water and the temperature of …
  2. chemistry

    a 100.00 mL sample of water has an initial temperature of 20.0 degrees C. The water is heated, and after 5 minutes its temperature is 50 degrees C. approximately how much energy was absorbed by the water?
  3. Science

    1. How much heat energy is lost by 3 kg of water when it cools from 80 degrees C to 10 degrees C?
  4. chemistry

    a 100 mL {100 grams} of water at 4.0 degrees celsius is heated until its tempurture is 37 degrees celcus. if the specific heat of water is 4.18 joules/grams degrees celcus calculate the amount of heat energy needed to cause this rise …
  5. chemistry

    Liquid water has a specific heat of 4.184 J/g degrees celcius. If 50 grams of water is heated from10 to 55 degrees celcius, what is the heat energy in joules needed to heat this water
  6. Physics 20

    1. How much heat energy is required to change 500 grams of water at 100 degrees Celsius to steam at 100 degrees Celsius?
  7. Physics

    Please Help! I am having difficulties grasping these concepts. Explain please! 1. How much heat energy is required to change 500 grams of water at 100 degrees Celsius to steam at 100 degrees Celsius?
  8. Chem

    41. How much heat energy must you use to raise the temperature of 100 grams of water from 60C to 70C. Show your calculations. 42. You have a pot of 100C liquid water. If you add heat to the water, will the temperature start to raise …
  9. Chemistry

    How much energy in kJ is needed to heat 7.0L of water from35 degrees Fahrenheit to boiling point 100 degrees Celsius. If the density of water is 1.0g/cm^3 and the heat capacity of water is Cp= 4.184J/g degrees Celsius
  10. physic

    If the energy used to heat up a block of 2kg of copper is 115.8 kJ, what is the temperature it was heated to if the starting temperature was 100oC and the specific heat capacity is 386 J/kgK. temperature needed = energy/ mass x specific …

More Similar Questions