# Geometry (math)

posted by .

The center of two pulleys are 27cm apart. One has the raddius of 13cm and the other has a radius of 5 cm.. Find the length of the blet that surrounds the two pulleys rounded to 2 decimal places.

• Geometry (math) -

112.94cm

## Similar Questions

four pulleys are connected by two belts. Pulley A (radius 15cm) is the drive pulley and it rotates at 10 rad/s. Pulley B (radius 10 cm) is connected by belt 1 to pulley A. Pulley B' (radius 5cm) is concentric with pulley B and is rigidly …
2. ### Physics

How would you use a pulley system with one rope to pull at a single item at two points simultaneously?
3. ### Physics

As part a of the drawing shows, two blocks are connected by a rope that passes over a set of pulleys. One block has a weight of m1 = 562 N, and the other has a weight of m2 = 758 N. The rope and the pulleys are massless and there is …

Two blocks are connected by a rope that passes over a set of pulleys. One block has a weight of 412 N, and the other has a weight of 908 N. The rope and the pulleys are massless and there is no friction. (a) What is the acceleration …

you need to find the length of a broken automitive belt. the belt ran around 2 pulleys whose centers were 11 in apart. one of the pulleys is 4" dia. and the other is 6" dia. what is the totoal length of the belt needed to connect thr …
6. ### physics

Two construction workers each of mass m raise themselves on a hanging platform using pulleys as shown above. If the platform has a mass of 0.5m, the initial distance between the pulleys and the platform is d, and the workers each pull …
7. ### Science

The system of three pulleys is in equilibrium, the pulleys have masses of 9kg ,5kg,8kg respectively. The pulleys are frictionless & massless.find the force T ?
8. ### Physics

Two pulleys are connected by a belt that causes one pulley to rotate (via friction) as it is driven by the first pulley. The belt turns around the pulleys without slipping on either one. rA is 10.0 cm and rB is 25.0 cm. If wheel A …
9. ### geometry

On a piece of machinery, the centers of two pulleys are 3 feet apart, and the radius of each pulley is 6 inches. How long a belt (in feet) is needed to wrap around both pulleys?
10. ### trig

The centers of two belt pulleys, with radii of 3 cm and 6 cm, respectively, are 13 cm apart. Find the total area K enclosed by the belt.

More Similar Questions