PHYSICS

posted by .

The input piston of a hydraulic press is 20mm in diameter, and the output piston is 10mm in diameter. an input force of 1.0N will produce an output force of:

a- 0.25N
b- 0.50N
c- 2.0N
D- 4.0N

  • PHYSICS -

    .25 N

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. PHYSICS

    The input piston of a hydraulic press is 20mm in diameter, and the output piston is 10mm in diameter. an input force of 1.0N will produce an output force of: a- 0.25N b- 0.50N c- 2.0N D- 4.0N
  2. PHYSICS

    The input piston of a hydraulic press is 20mm in diameter, and the output piston is 10mm in diameter. an input force of 1.0N will produce an output force of: a- 0.25N b- 0.50N c- 2.0N D- 4.0N
  3. PHYSICS

    The input piston of a hydraulic press is 20mm in diameter, and the output piston is 10mm in diameter. an input force of 1.0N will produce an output force of: a- 0.25N b- 0.50N c- 2.0N D- 4.0N
  4. Physics

    In the process of changing a flat tire , a motorist uses a hydraulic jack. She begins applying a force of F1=8.6N to the input piston. As a result, the output plunger applies a force of F2=305N to the car. The height difference between …
  5. physics

    a hydraulic lift is designed for a gain of 100, so that a 10 N force applied at theinput piston will produce a force of 1,000 N at the output piston. If the radius of the input piston is 2 cm, the radius of the output is a) 200 cm, …
  6. physics

    A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston. pounds …
  7. Physics

    A hydraulic lift is used to jack a 780 kg car 15 cm off the floor. The diameter of the output piston is 15 cm, and the input force is 160 N. a)What is the area of the input piston (in m^2)?
  8. physics

    A hydraulic jack has an input piston with a diameter of 1.00 cm, and an output piston with a diameter of 6.00 cm. What weight (in N) can be lifted when a force of 45.8 N is applied to the input piston?
  9. physics

    An hydraulic press has an input cylinder of 2cm diameter and an output cylinder of 6cm diameter. Find the force exerted by the output piston when a force of 20N is applied to the input piston.
  10. Physics

    A hydraulic press has an input cylinder 4.0cm in diameter and an output cylinder 16cm in diameter. (a) Assuming 100 percent efficiency, find the force exerted by the output piston when a force of 170N is applied to the …

More Similar Questions