Analytical Chemistry

posted by .

Hi.
We performed an experiment on UV-Vis Spectrometry, by testing the absorbance of KMnO4 and KCr2O7 solutions at different concentrations. We prepared the dichromate solutions with dilute sulfuric acid. Why didn't we use water, what is the purpose of sulfuric acid?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Chemistry

    Why does Beer’s Law apply only to relatively dilute solutions and not concentrated ones?
  2. chemistry- absorbance & transmittance

    An unknown was prepared with the concentration of 0.000120 M. A Beer's Law plot was prepared using the absorbance values from standard solutions of ASA and a line drawn through all the points passed through the origin with a slope …
  3. chemistry

    An unknown was prepared with the concentration of 0.000630 M. A Beer's Law plot was prepared using the absorbance values from standard solutions of ASA and a line drawn through all the points passed through the origin with a slope …
  4. chemistry

    An unknown was prepared with the concentration of 0.000630 M. A Beer's Law plot was prepared using the absorbance values from standard solutions of ASA and a line drawn through all the points passed through the origin with a slope …
  5. science(chem) Dr.Bob Question from before

    The only reason I asked about the balance is that most analytical balances in use in schools weigh to the nearest 0.1 mg although that may have changed since I retired. There are semi-micro balances that weigh to 5 places and micro-balances …
  6. chemistry

    We performed an experiment on UV-Vis Spectrometry, by testing the absorbance of KMnO4 and KCr2O7 solutions at different concentrations. We prepared the dichromate solutions with dilute sulfuric acid. Why didn't we use water, what is …
  7. Chem Lab Help

    You are provided with 5 M solutions of sodium hydroxide and hydrochloric acid for use in this experiment (Separation). How you would have prepared these solutions. Thanks!
  8. Chem Help Please!

    You are provided with 5 M solutions of sodium hydroxide and hydrochloric acid for use in this experiment (Separation). How you would have prepared these solutions. Thanks!
  9. math

    For a experiment, Jenna needs to make a dilute solution that is 10 ounces of 40% acid. But Jenna only has solutions that are 30% acid and 70% acid. How many ounces of 70% acid solutions should she use?
  10. Chemistry

    Three unknown solutions were prepared by pipetting 15.00 mL of an unknown nickel solution into a 200.00 mL volumetric flask and diluting to the mark. Then three samples were prepared from this dilute unknown solution by pipetting 5.00 …

More Similar Questions