physics

posted by .

The steering wheel of a car has a radius of 0.18 m, while the steering wheel of a truck has a radius of 0.25 m. The same force is applied in the same direction to each. What is the ratio of the torque produced by this force in the truck to the torque produced in the car

  • physics -

    (Torque,truck)/(Truck,car)
    = F,truck*R,truck/(F,car*R,truck)
    = 0.25/0.18 = ___
    since the forces are the same.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    Forces F1=7.50N and F2=5.30N are applied tangentially to a wheel with radius 0.330 m. What is the net torque on the wheel due to these two forces for an axis perpendicular to the wheel and passing through its center?
  2. physics

    A car weighing 1.07 x 10^4 N is at rest on a 32.5° incline. Each wheel bears an equal part of the car's weight. Thus the axles apply a vertical downward force of 2.68 x 10^3 N to the center of each wheel. (a) Find the frictional force …
  3. physics

    THe steering wheel of a car has a diameter of 60cm and turns a shaft 4cm in diameter (a) If a 90nt force is needed to turn the wheel, what torque is exerted on the wheel?
  4. physics

    The wheel of a car has a radius of 0.390 m. The engine of the car applies a torque of 466 N·m to this wheel, which does not slip against the road surface. Since the wheel does not slip, the road must be applying a force of static …
  5. physics

    You are trying to raise a bicycle wheel of mass m and radius R up over a curb of height h. To do this you apply a horizontal force F. What is the smallest magnitude of the force F that will succeed in raising the wheel onto the curb …
  6. Physics

    The wheel of a car has a radius of 0.390 m. The engine of the car applies a torque of 282 N · m to this wheel, which does not slip against the road surface. Since the wheel does not slip, the road must be applying a force of static …
  7. Physics (torque)

    The steering wheel of a certain vehicle has a diameter of 38.9 cm, and it turns a shaft that is 8.3 cm in diameter. If a 85.9 N force is needed to turn the steering wheel, what torque is exerted on the wheel?
  8. physics

    A wheel rotates without friction about a stationary horizontal axis at the center of the wheel. A constant tangential force equal to 83.N is applied to the rim of the wheel. The wheel has radius 0.110m . Starting from rest, the wheel …
  9. phyics

    The steering wheel of a car has a radius of 0.19 m, and the steering wheel of a truck has a radius of 0.26 m. The same force is applied in the same direction to each steering wheel. What is the ratio of the torque produced by this …
  10. physics

    The steering wheel of a car has a radius of 0.17 m, and the steering wheel of a truck has a radius of 0.24 m. The same force is applied in the same direction to each steering wheel. What is the ratio of the torque produced by this …

More Similar Questions