Post a New Question

PHYSICS

posted by .

A 33 cm-tall, 6 cm-diameter plastic tube has a sealed bottom. 266 g of lead pellets are poured into the bottom of the tube, whose mass is 45 g, then the tube is lowered into a liquid. The tube floats with 5 cm extending above the surface. What is the density of the liquid?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A 680 Hz tuning fork is held over a long vertical tube full of water. If the tube is 1.00 m long, how many resonances will be heard as the tube is allowed to empty from the bottom?
  2. physics

    Container A is sealed (not open to the atmosphere) filled with water with an unlimited width and depth. Container A consists of Section 1 and 2. The upper part of Container A, Section 1 has 5 feet of air at 21.83 psi Tube B is 80 feet …
  3. Physics

    A test tube standing vertically in a test tube rack contains 2.4 cm of oil, whose density is 0.81 g/cm^3 and 6 cm of water. What is the gauge pressure on the bottom of the tube?
  4. Physics

    A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 145.0 mm from the central spin axis, and if the machine hits 46500 rev/min, what would be the centripetal …
  5. Math

    A cylindrical tube is open at both ends.the internal diameter tube 10.4cm and its length is 25cm. If the thickness of the tube 8mm everywhere,find the total surface of area of the tube.
  6. Physics

    A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 180.0 mm from the central spin axis, and if the machine hits 54000 rev/min, what would be the centripetal …
  7. Physics

    A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 165.0 mm from the central spin axis, and if the machine hits 53500 rev/min, what would be the centripetal …
  8. Phyiscs

    A hollow copper tube (diameter = 4.01 cm) is sealed at one end and loaded with lead shot to give a total mass of 0.218 kg. When the tube is floated in pure water, what is the depth, z, of its bottom end?
  9. Physics

    A test tube in a centrifuge is pivoted so that it swings out horizontally as the machine builds up speed. If the bottom of the tube is 160.0 mm from the central spin axis, and if the machine hits 40500 rev/min, what would be the centripetal …
  10. physics

    A uniform vertical glass tube open at the lower end and sealed at the lower end is lowered into sea water thus trappung the air int he tube . It is observed that when the tube is submerged to a depth 10 meters the sea water has entered …

More Similar Questions

Post a New Question