college chem

posted by .

Calculate the pH of a 25 mL sample of distilled water after the addition of 1 mL, 2 mL, 3 mL, 4 mL, and 5 mL of NaOH and HCL. (0.1 M HCl and NaOH)
In total, you need to show 10 calculations.

  • college chem -

    See your post below.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. chemistry

    HCl is titrated with NaOH. When doing the titration, some of the NaOH splashed onto the inside surface of the Erlenmyer flask, and you forgot to rinse it into your sample. Would the systematic error be falsely high, low, or unaffected …
  2. chem

    HCl is a strong acid and ionizes 100%. NaOH is a strong base and ionizes 100%. We have no way of knowing the pH of HCl + H2O because the problem doesn't state the amount of HCl added or the concentration of HCl. For the NaOH + HCl …
  3. ap chemistry

    please explain titration problems. I'm a total noob at this and am trying to answer some prelab questions. Examples: 1. How many mL of a 0.800 M NaOH solution is needed to just neutralize 40 mL of a 0.600 M HCl solution?
  4. Chemistry (heat flow, simple)

    Well I know to calculate heat flow you use, q=ms delta t. for this experiment we mixed naoh with hcl into water. the total mass (volume) of the mixture was 100g the temperature change for naoh was 11.7 degrees C and for hcl it was …
  5. Chemistry

    Calculate the pH of a 25 mL distilled water sample after the addition of 2 mL of HCl Calculate the pH of a 25 mL distilled water sample after the addition of 2 mL of NaOH
  6. Chemistry

    Calculate the pH of a 25 mL sample of distilled water after the addition of 1 mL, 2 mL, 3 mL, 4 mL, and 5 mL of NaOH and HCL. (0.1 M HCl and NaOH) In total, you need to show 10 calculations.
  7. chemistry

    Okay so I did this problem, but it seems wrong?
  8. Chemistry - Solubility

    INFORMATION: [HCl] = 0.1388 M We placed 0.5 g Ca(OH)2 in 100 mL of the following solutions: Flask A: Distilled Water (7.4 mL of HCl needed to titrate) Flask B: 0.05 M NaOH (7.5 mL of HCl needed to titrate) Flask C: 0.025 M NaOH (10.8 …
  9. Chemistry - Solubility

    INFORMATION: [HCl] = 0.1388 M We placed 0.5 g Ca(OH)2 in 100 mL of the following solutions: A 25 ml aliquot was used Flask A: Distilled Water (7.4 mL of HCl needed to titrate) Flask B: 0.05 M NaOH (7.5 mL of HCl needed to titrate) …
  10. chemistry

    A student adds 25.00mL of distilled water to a 10.00mL sample of HCl of an unknown molarity and titrates this against a 0.085M NaOH solution. Will the addition of the water interfere with the determination of the molarity of the HCl …

More Similar Questions