PHYSICS

posted by .

The hydraulic gradient in an 10-ft-thick aquifer at a site of uniform flow prior to pumping is -0.02. The hydraulic conductivity is 100 ft/day. True or False: After pumping starts at a well at a rate of 10,000 cubic feet per day, the distance from the well to a point of stagnation is equal to about 80 ft.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. calculus

    You are working as assistant to a major movie producer from Hollywood, but mainly you look after pre-release film publicity. You are an old hand at publicity, having worked in several production companies before. Based on previous …
  2. physics

    An automobile having a mass of 1750 kg is placed on a hydraulic lift in a garage. The piston lifting the car is 0.244 m in diameter. A mechanic attaches a pumping mechanism to a much smaller piston, 1.50 cm in diameter, which is connected …
  3. Science

    How are hydraulic lifts and hydraulic brakes similar?
  4. groundwater science

    For one dimensional flow, what is the flow rate in a 2.0-m long sample of clean saturated sand having a cross-sectional area of 0.05 m2, and a hydraulic conductivity value of 10-3 m/s, if the drop in head over the length of the sand …
  5. Environmental engineering

    (10 Points) A contractor is trying to estimate the distance to be expected of a drawdown of 4.81 m from a pumping well under the following conditions: Pumping rate = 0.0280 cubic meter per seconds Pumping time = 1066 d Drawdown in …
  6. Math

    Your municipality withdraws 10,000 gallons per day from an aquifer that originally held 1,000,000 gallons. The recharge rate to the aquifer is 2,000 gallons per day. Determine how long it will take before the aquifer is depleted
  7. Differential Equations

    A tank originally contains 5 lb of salt dissolved in 200 gal of water: Starting at time t=0, a salt solution containing 0.10 lb/gal is to be pumped into the tank at a constant rate and the well-stirred mixture is to flow out of the …
  8. Physics

    Figure 18-46 shows a hydraulic lift operated by pumping fluid into the hydraulic system. The large cylinder is 40 cm in diameter, while the small tube leaving the pump is 1.7 cm in diameter. A total load of 2500 kg is raised 2.2 m …
  9. waste water treatment

    QF Description Wastewater from a small town is treated in a trickling filter which is preceeded by a screen, sand-removal and primary clarification. The maximum hydraulic capacity, or peak flow, of the treatment plant is 1,500 m3/h. …
  10. Please help asap science

    1.an engine develops 65kW over a period of 20minutes. The engine uses 5kg of petrol. Calculate the following:- A. The heat gegenerated B. The power generated by the petrol C. The efficiency Of the engine 2.A square steel plate with …

More Similar Questions