physics

posted by .

a physical pendulum consists of a uniform solid disk (of radius R = 42.0 cm) supported in a vertical plane by a pivot located a distance d = 13.0 cm from the center of the disk. The disk is displaced by a small angle and released. What is the period of the resulting simple harmonic motion?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. PHYSICS--SHM

    A pendulum consists of a uniform disk with radius r = 10 cm and mass 545 g attached to a uniform rod with length L = 500 mm and mass 300 g. (figure: one end of the rod attach to a pivot and the other end attach to the center of the …
  2. physics

    A pendulum consists of a uniform disk with radius r = 10 cm and mass 480 g attached to a uniform rod with length L = 500 mm and mass 175 g. (a) Calculate the rotational inertia of the pendulum about the pivot. (b) What is the distance …
  3. physics

    A curcial part of a piece of machinery starts as a flat uniform cylindrical disk of radius R0 and mass M. It then has a circular hole of radius R1 drilled into it. The hole's center is a distance h from the center of the disk. Find …
  4. physics

    A children's merry-go-round in a park consists of a uniform 200kg disk rotating about a vertical axis. the radius of the disk is 6 m and a 100kg man is standing on the outer edge when the disk is rotating at a speed of 0.20rev/s. how …
  5. physics

    A solid cylindrical disk has a radius of 0.17 m. It is mounted to an axle that is perpendicular to the circular end of the disk at its center. When a 35-N force is applied tangentially to the disk, perpendicular to the radius, the …
  6. Physics

    A uniform solid disk of radius 1.7 m and mass 81.3 kg is free to rotate on a frictionless pivot through a point on its rim. If the disk is released from rest in the position shown by the solid circle, what is the speed of its center …
  7. Physics

    A machine part is made from a uniform solid disk of radius R and mass M. A hole of radius R/2 is drilled into the disk, with the center of the hole at a distance R/2 from the center of the disk (the diameter of the hole spans from …
  8. Physics

    A solid cylindrical disk has a radius of 0.18 m. It is mounted to an axle that is perpendicular to the circular end of the disk at its center. When a 40-N force is applied tangentially to the disk, perpendicular to the radius, the …
  9. Physic

    A machine part is made from a uniform solid disk of radius R = 0.161 m and mass M = 7.75 kg. A hole of radius R/2 is drilled into the disk, with the center of the hole at a distance R/2 from the center of the disk (the diameter of …
  10. physics

    A solid disk rotates in the horizontal plane at an angular velocity of 0.040 rad/s with respect to an axis perpendicular to the disk at its center. The moment of inertia of the disk is 0.13 kg·m2. From above, sand is dropped straight …

More Similar Questions