Geometry
posted by crystal .
a door that is 6 ft by 6inches tall and 36 inches wide. Can apeice of plywood that is 7 ftby 8 ft be carried through the door?
Respond to this Question
Similar Questions

phy
A 12N force is applied to a 20kg door If a frictional torque is present what will be the angular acceleration of the door The door is 80cm wide and I=1/3ml^2. 
Math
Jill's front door is 42" wide and 84" tall. She purchased a circular table that is 96 inches in diameter. Will the table fit through the front door? 
Math
Jill's front door is 42" wide and 84" tall. She purchased a circular table that is 96 inches in diameter. Will the table fit through the front door? 
math
you want to take an 8ft.wide piece of plywood through a 36inchwide door. What is the minimum possible height for the door to allow youto fit the plywood? 
Physics
A revolving door consists of four rectangular glass slabs,with the long end of each attached to a pole that acts as the rotation axis. Each slab is 2.60m tall by 1.50m wide and has mass 39.5 . Find the rotational inertia of the entire … 
Geometry
A door is 6ft 6in high and 36 in wide. Can a thin piece of of plywood 7ft wide be carried through the door? 
Physics
There is a door that is 1.0 m wide and can rotate about a vertical axis without friction. The doorâ€™s mass is 15 kg and is free to swing open. Someone fires a 10 g bullet at 400 m/s into the exact center of the door, perpendicular … 
algebra
Tom decides to make a rectangular desk top from a plywood door that was stored in the basement. The door was 2 feet longer than twice its width. To get the desired size desk he cuts 3 inches off its length and 1/2 foot off its width. … 
Physics
A solid wood door, 90.0 cm wide by 2.00 m tall has a mass of 35.0 kg. It is open and at rest. A small 500g ball is thrown perpendicular to the door with a speed of 20.0 m/s and hits the door 60.0 cm from the hinged side. The ball … 
physics
To leave Nicholson, you exit via the door to the quad. The door is 40 inches wide and has a mass of 200 kg. You push the door with a perpendicular force of 52.61N exactly 0.86m away from the hinge. This generates the minimum torque, …