physics

posted by .

The drawing shows a hydraulic chamber in which a spring (spring constant = 1292 N/m) is attached to the input piston, and a rock of mass 24.7 kg rests on the output plunger. The piston and plunger are at the same height, and each has a negligible mass. By how much is the spring compressed from its unstrained position?

  • physics -

    The answer will depend upon the ratio of the piston areas. The large piston will exert a larger force. Were piston areas or diameters indicated in the drawing you did not show?

  • physics -

    dragonballs

  • physics -

    your so stupider than me if you donts know hows to do this problam!

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    In the process of changing a flat tire, a motorist uses a hydraulic jack. She begins by applying a force of 49 N to the input piston, which has a radius r1. As a result, the output plunger, which has a radius r2, applies a force to …
  2. Physics

    Hi, I try to solve this problem with this formula and I can not get the right answer ! F2 = F1 ( R2/R1) A dentist's chair with a patient in it weighs 1790 N. The output plunger of a hydraulic system begins to lift the chair, when the …
  3. physics

    The drawing shows a hydraulic chamber in which a spring (spring constant = 1292 N/m) is attached to the input piston, and a rock of mass 24.7 kg rests on the output plunger. The piston and plunger are at the same height, and each has …
  4. Physics

    In the process of changing a flat tire , a motorist uses a hydraulic jack. She begins applying a force of F1=8.6N to the input piston. As a result, the output plunger applies a force of F2=305N to the car. The height difference between …
  5. Physics

    A dentist's chair with a patient in it weighs 2260 N. The output plunger of a hydraulic system begins to lift the chair when the dentist's foot applies a force of 61 N to the input piston. Neglect any height difference between the …
  6. physics

    a spring of spring length 5times 10 tothe power of 4 N/m,is between a rigid beam and the output piston of a hydraulic lever.an mpty container with negligable lengthsits on th input piston.the input piston has an area of Ai and the …
  7. physics

    a 10.0 cm cylindrical chamber has a 5.0cm diameter piston attached to one end. The piston is connected to an ideal spring with a spring constant of 10.0N/cm. Initially, the spring is not compressed but is latched in place so that it …
  8. Physical Science

    A dentist’s chair with a patient in it weight 2100N. The output plunger of a hydraulic system begins to lift the chair, when the dentist’s foot applies of 55N to the input piston. Neglect any height difference between the plunder …
  9. physics

    The hydraulic oil in a car lift has a density of 8.54 x 102 kg/m3. The weight of the input piston is negligible. The radii of the input piston and output plunger are 5.01 x 10-3 m and 0.160 m, respectively. What input force F is needed …
  10. PHYSICS

    A dentist's chair with a patient in it weighs 2180 N. The output plunger of a hydraulic system begins to lift the chair, when the dentist's foot applies a force of 73.6 N to the input piston. Neglect any height difference between the …

More Similar Questions