math

posted by .

a overhead gantry crane that is equiped whith a crane and hook block and reeved with 6 parts of line is lifting 12 tons what is the load on the haul line
A.2000lbs
B.6000lbs
C.8000lbs
D.4000lbs
please show the formula

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A 25 ft long crane supported at its lower end by a pin is elevated by a horizontal cable. A 250 lb load is suspended from the outer end of the crane. The center of gravity of the crane is 10 ft from the pin and the crane weighs 200 …
  2. science physics

    A giant crane in Washington DC was tested by lifting a 2.232x10^6 kg load. Find the magnitude of the force needed to lift the load with a net acceleration of 0m/s^2
  3. science physics

    A giant crane in Washington DC was tested by lifting a 2.232x10^6 kg load. Find the magnitude of the force needed to lift the load with a net acceleration of 0m/s^2
  4. physics

    A crane lifts a concrete hopper of mass 370 kg from the ground to the top of a 38 m building that is under construction. The hopper moves with a constant speed during the lift. The power rating of the crane motor is 8.2 kiloWatts. …
  5. Physics

    The arm of a crane at a construction site is 13.1 m long, and it makes an angle of 20° with the horizontal. Assume that the maximum load the crane can handle is limited by the amount of torque the load produces at the base of the …
  6. Cranes

    08/09/2005 Physics A crane is lifting a 200 pound object. The crane boom is 50 ft long. The boom forms an 85 degree angle with the horizontal. What is the torque applied to the crane boom?
  7. Physics

    After an unfortunate accident at a local warehouse you have been contracted to determine the cause. A jib crane collapsed and injured a worker. The horizontal steel beam had a mass of 88.50 kg per meter of length and the tension in …
  8. Physics

    crane lifts a 75 kg girder 8.85 m. How much work does the crane do lifting with an upward acceleration of 1.20 m/s ^2?
  9. Math-trigonometry

    Please help me with the steps !i don't understand this. The working arm of a tower crane is 192m high and has a length of 71.6 m. Suppose the hook reaches the ground and moves along the arm of the trolley, a) determine max distance …
  10. Physics

    Fig.19 shows a crane lifting a car of mass 850 kg at constant velocity through a height of 12m in a time of 40s. The crane has a working efficiency of 60%. i) Calculate the tension in the lifting cable (in N) ii) Calculate the total …

More Similar Questions