math

posted by .

what is the weight of a ten foot length of steel pipe? the inside diameter of the pipe is 3/4 of an inch, and the outside diameter i one inch. steel weighs 490lbs. per cubic foot.

Similar Questions

1. math

a 15 foot long standard weight pipe with a diameter of 4 inches is filled with water. what would be the total approximate weight of the pipe and the water it contains?
2. math

what is the weight of a ten foot length of steel pipe?
3. physic

you need to extend a 2.50 inch diameter pipe, but you only have 1.00 inch diameter pipe on hand.you make a fitting to connect these pipes end to end. if the water is flowing at 6.00cm/s in the wide pipe, how fast will it be flowing …
4. Math

A pipe has an outside diameter of 1.25 inches and an inside diameter of 0.75 inches. If Kelly hacksaws the pipe in two, what fraction of the pipe cross sectional area is sawn when the blade breaks through to the inside?
5. math

A cross section of a hollow circular pipe shows that its inner diameter is 2 1/10 inches and that the pipe is 3/5 inch thick. What is its outside diameter?
6. Math

Tom needs a pipe that is 21/24 of an inch in diameter. The store has 7/8 inch pipe. Should he buy it?
7. Math

A steel reinforcing rod is 12 ft. long and 1" thick in diameter. If a cubic foot of steel weighs 490 lb., how much does the rod weigh (to the nearest pound)?
8. math

A steel post is 6 ft. long and 6" thick in diameter. If a cubic foot of steel weighs 490 lb., how much does the rod weigh (to the nearest pound)?
9. Geometry

The outside diameter of a pipe is 5 cm. The inside diameter is 4 cm. The pipe is 4 meters long. What is the volume of the material used for this length of pipe?
10. Math

A length of metal pipe has a circumference of 2.5 inches. the pipe is 1/16 inches thick. a gas fitter needs to know the inside diameter of the pipe to calculate the gas pressure. What is the total diameter of pipe including metal?

More Similar Questions