PHYSICS Gr.11

posted by .

i am completely confued :( what are

balanced and unbalanced forces? How can u

tell by looking at a free body diagram

and/or a problem?


thanks

  • PHYSICS Gr.11 -

    If the sum of forces = 0 then balanced.
    If unbalanced then sum of forces = mass times acceleration

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    The free-body diagram in the drawing shows the forces that act on a thin rod. The three forces are drawn to scale and lie in the plane of the screen. Are these forces sufficient to keep the rod in equilibrium, or are additional forces …
  2. Physic

    The free-body diagram in the drawing shows the forces that act on a thin rod. The three forces are drawn to scale and lie in the plane of the screen. Are these forces sufficient to keep the rod in equilibrium, or are additional forces …
  3. Physics

    Ok I guess the reason why I do not know how to do this problem is because I can not draw the proper free-body diagram... Three blocks on a frictionless horizontal surface are in contact with each other as shown in Fig. 4-5. A force …
  4. physics

    A uniform 250 N ladder rests against a perfectly smooth wall, making a 35 degree angle with the wall. (a)Draw a free body diagram of the ladder. (b) Find the normal forces that the wall and the floor exert on the ladder. (c) What is …
  5. 6th grade science (physics)

    explain Newton's 1st law in relation to forces, balanced forces and unbalanced forces
  6. 6th grade science (physics)

    explain and describe Newton's 1st law and as it applies to forces, balanced forces and unbalanced forces
  7. physics

    Pleaseee help explain how to draw the free body diagrams for this problem!!! Two blocks with masses m1 = 10.9 kg and m2 = 79.3 kg, shown in the figure (in the figure the 79.3kg block(m2) is on a flat surface, the 10.9kg(m1) block is …
  8. physics

    A person throws a 2.50 lb stone into the air with an initial upward speed of 15.0 ft/s. Part A- Make a free-body diagram of the forces for this stone after it is free of the person's hand and is traveling upward Part B - Make a free-body …
  9. Check my answers 6 ?s- Physics

    What is a free body diagram? (Points : 1) a drawing of an object in free fall a diagram showing all the forces acting on an object but not its surroundings <-- a diagram showing the shape of an object and the forces that act on
  10. Physics- Free Body Diagram; Truss with Pin Joint

    The picture shows a two-dimensional free body diagram of a truss with a pin joint at one end. The free body diagram at the pin joint should show a. no forces at the joint b. only parallel force component c. only perpendicular force …

More Similar Questions