Post a New Question

physics

posted by .

A 250. MW coal-fired power plant burns fuel with an energy density of 35.0 MJ kg-1. Water enters the temp reduction tower at 293 K and leaves at 350. K at a rate of 4200. kg s-1.

4. Calculate the energy removed by the water each second.

5. Calculate the energy produced by the combustion of coal each second.

6. Calculate the overall efficiency of the power plant.

7. Calculate the mass of coal burned each second.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics-energy conservation

    a mordern power station,or, more correctly, an energy station, converts heat energy into electrical energy at an efficiency od 50% if the station produces electrical energy at a rate of 1.00GW from burning coal, calculate the mass …
  2. physics

    A sample of anthracite has a moisture content of 5% when mined and an energy density of 35 kJg-1 when completely dried. Assuming that during combustion, the temperature of the water in the un-dried coal is raised from 20.0oC to 100.oC, …
  3. physics

    A 250. MW coal-fired power plant burns fuel with an energy density of 35.0 MJ kg-1. Water enters the temp reduction tower at 293 K and leaves at 350. K at a rate of 4200. kg s-1. 4. Calculate the energy removed by the water each second. …
  4. Physics

    A typical coal-fired power plant burns 310 metric tons of coal every hour to generate 790 MW of electricity. 1 metric ton= 1000 kg. The density of coal is 1500 {\rm kg}/{\rm m}^{3} and its heat of combustion is 28 \;\rm MJ/kg. Assume …
  5. Physics

    A fossil-fuel power plant that generates 1000MW of electrical power discharges 1600MJ per second as waste heat into the river. A)At what rate(in MW) is thermal energy obtained fromt the burning of coal?
  6. Power generation

    need help 2. Large central power stations typically have a power output capacity of 1000 MW and convert about 35 percent of the input energy to electricity. Consider such a plant that burns coal with an energy content of 24 MJ/kg. …
  7. Physics

    A power plant burns coal and generates an average of 630.0 MW of electrical power while discharging 1058.40 MW as waste heat. Find the total electrical energy generated by the plant in a 30-day period.
  8. physics

    A power plant burns coal and generates an average of 600.0 Megawatts (MW) of electrical power while discharging 900.00 MW as waste heat. Find the total electrical energy generated by the plant in a 30-day period. Coals vary a lot in …
  9. science(check answers)

    1. A 2. C 3. A 4. D 1. Coal, oil, and natural gas are inexpensive sources of fuel which do not cause pollution when used. A. true B. false 2. One reason people around the world use coal as an energy source is: A. It is nonrenewable. …
  10. physics

    a. A power plant burns coal and generates an average of 610.0 Megawatts (MW) of electrical power while discharging 915.00 MW as waste heat. Find the total electrical energy generated by the plant in a 30-day period. b. Coals vary a …

More Similar Questions

Post a New Question