Physics

posted by .

A gas sample is confined to a chamber with a movable piston. A small load is placed on the piston and the system is allowed to reach equilibrium, shown above. If the weight of the piston and the load is F=70.0 N and the piston has an area of A=9.00x10-4 m2, what is the pressure exerted on the piston by the gas?

  • Physics -

    3.24E5

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 10-2 m2, and the pressure outside the …
  2. Physics

    Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 10-2 m2, and the pressure outside the …
  3. physics

    in the hydraulic machine shown, you observe that when the small piston is pulled down 10cm, yhe large piston is raised 1 cm. if the small piston is pushed down with a force of 100n, what is the most weight that the large piston can …
  4. Thermodynamics

    3. A gas is confined in a 0.47-m-diameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the pressure of the gas in kPa?
  5. physics

    The load-bearing piston in a certain hydraulic system has an area 20 times as large as the input piston. If the larger piston supports a load of 2000N, how large a force must be applied to the input piston?
  6. Physics

    A gas is confined in a 0.47-m-diameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the force (in Nt) exerted on the gas by the …
  7. Physics

    The load-bearing piston in a certain hydraulic system has an area 35 times as large as the input piston. If the larger piston supports a load of 9000 N, how large a force must be applied to the input piston?
  8. physics

    A hydraulic lift has a leak so that it is only 6.0 × 101% efficient in raising its load. If the large piston exerts a force of 1.00 × 102 N when the small piston is depressed with a force of 15 N and the radius of the small piston …
  9. Physics

    A cylinder with a movable piston has the square meter 24cm2. How far will the piston go down if 5.0 kg weight is laid on the piston and the temperature remains the same?
  10. physics

    The small piston of a hydraulic lift has a cross-sectional area of 3.6 cm2 and the large piston has an area of 86 cm2. What force F must be applied to the small piston to maintain the load of 52 kN at a constant elevation?

More Similar Questions