math
posted by Sorrells .
i need help on ratios, gears and teeth.ex.
teeth on driving gear A35
teeth on driving gear B?
gear ratio2 1/2 to 1
what is gear B, and how will i figure this out?
Respond to this Question
Similar Questions

driveing problem
hi this is my problem... A shaft turning at the 1800 r/min is coupled to a gear with 80 teeth, matching a gear with 62 teeth. In turn this gear is fitted to an intermediate shaft driving a gear with 40 teeth. This gear in turn drives … 
science
A gear with 30 teeth turns a gear with 5 teeth. How many turns will the driven gear turn for every turn the drive gear makes? 
physics
If gear A has 30 teeth and is spinning at 800rpm, gear B has 50 teeth and gear C has 20 teeth and gear D is spinning at 300rpm. How many teeth does gear D have? 
9th grade science
if the turns of the output gear over the turns of the input gear is equal to the number of teeth on the input gear over the number of teeth on the output gear, the input gear has 36 teeth and the output has 10, the output gear has … 
Intergated chemistry/physics
Draw a setup containing 3 gears. For every turn of the input gear, you need the output gear to spin 9 times. The drawing doesn't have to be perfect, but make sure to label the input gear, the output gear, and the number of teeth on … 
math
A gear with 60 teeth is meshed to a gear with 40 teeth. If the larger gear revolves at 20 revolutions per minute, how many revolutions does the smaller gear make in a minute? 
Math
2 Gears are in their starting position. Gear 1 has 6 teeth. Gear 2 has 8 teeth. As gear 1 turns, it causes gear 2 to turn at a different rate. Gear 1 is rotated until the two gears are back at starting position. What is the minimum … 
MTH 156
When two gears are mashed the revolution per minutes (rpm) are inversely proportional to the number of teeth, as show below. In one machine the rpm ratio of the larger gear to the small gear is 4:7 The small gear has 216 teeth In second … 
Algebra
Bambi is restoring a clock with a broken gear. A fragment of the small gear has 5 teeth . a larger unbroken gear has 18 teeth and is 2cm in dia.She knows that for every 2 times the large gear turns the smaller gear turns 3 times. How … 
math
A pinion gear with 10 teeth is driving a spur gear with 40 teeth. the spur gear is rotating at 160 rpm. determine the speed of the pinion gear?