# Science, Chemistry

posted by .

I have been told that to prepare 1L of 70% H2SO4 from concentrated sulphuric acid (96% with density 1.84g/ml), I should use the following equation to find out the volume of conc. acid needed (Vml).

V x 1.84 x 0.96={(1000-V)+ 1.84V}0.7

i.e. V= 594ml of conc H2SO4.

Use 594ml of conc H2SO4 and top up to 1L volumetric flask with water.

Can you please explain this equation to me? Many thanks for your help.

• Science, Chemistry -

Use the equation:
V1C1 = V2C2
(V1)((0.96) = (1000mls)(0.70)
Solve for V1

• Science, Chemistry -

After looking at your question more carefully, I changed my mind. The equation, V1C1 = V2C2, works only if the concentrations are ratios of amount of solute over volume of solution. The formula you are using is new to me and since you have made substitutions into it I am not sure what its correct form is.
Your question is not clear either. Are you asking about how to use that formula, or how to derive it?

• Science, Chemistry -

I would like to know how to derive it, please?

## Similar Questions

1. ### science

Concentrated sulfuric acid (18.4 molar H2SO4) has a density of 1.84 grams per milliliter. After dilution with water to 5.20 molar, the solution has a density of 1.38 grams per milliliter and can be used as an electrolyte in lead storage …
2. ### Science

How do I prepare 1% H2SO4 from concentrated sulphuric acid (96% with density 1.84g/ml)?
3. ### Chemistry pls help

I have a chemistry question Please advise how do I prepare 1L of 75% H2SO4 from concentrated H2SO4 (98% of density 1.84g/ml)?
4. ### Chemistry help needed

How do I prepare 90% formic acid from conc. formic acid (98%-100% of density 1.22g/ml)?
5. ### chemistry

Commercially available concentrated sulfuric acid is 18.0 M H2SO4. Calculate the volume (in mL) of concentrated sulfuric acid required to prepare 1.60 L of 0.320 M H2SO4 solution.
6. ### chemistry

a sample of sulphuric acid is 95.7% by mass and has a density of 1.84g/cubic cm.calculate the mass of pure H2SO4 in a 2.00L bottle and volume of acid that contain 200g of pure H2SO4.
7. ### Science +2

Concentrated sulphuric acid has a density of 1.9 g/ml and is 99% H2SO4 by weight. calculate the molarity of H2SO4 in this acid.
8. ### chemistry

concentrated aqueous sulphuric acid is 98% sulphuric acid by mass and has a density of 1.80 g/l. Volume of acid required to make one litre of 0.1M sulphuric acid solution is
9. ### chemistry

Calculate the volume of 2.0 mol dm^-3 sulphuric acid,H2SO4 needed to prepare 2.5 dm^3 of 0.5 mol dm^-3 of the same acid solution.
10. ### science

Suppose you need 2.0 L of 6.0 M sulphuric acid, and you have a bottle of concentrated acid of 18.0 M sulphuric acid. a). How much of this would be needed to a 2 L, 6.0 sulphuric acid solution?

More Similar Questions